Dimensions: mm Recommended Hole Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 10 kHz/ 0.1 mA L 2x10 mH 30% Rated Current 70 C I 5 A max. R DC Resistance 20 C R 2x55 m max. O 1,3 DC 12 7 Rated Voltage 50 Hz U 250 V (AC) max. R 7 12 Insulation Test Voltage 50 Hz/ 5 mA/ 2 sec. U 1500 V (AC) T 6 1 1 6 25 0,5 25 30 0,5 Scale - 1:2 Schematic: 1 typ. General Properties: It is recommended that the temperature of the component does not exceed +125C under worst case conditions 1 6 7 Storage Temperature (in original -20 C up to +60 C packaging) 2 1 12 Operating Temperature -40 C up to +125 C Temperature Rise < 55K Test conditions of Electrical Properties: +20C, 33% RH if not specified differently Scale - 1:2 CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions SSt HasA DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany WE-CMB Common Mode Power Tel. +49 (0) 79 42 945 - 0 ORDER CODE Line Choke www.we-online.com 744825510 eiSos we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 005.004 Valid 2015-11-10 eiSos 1/5 XL This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 21 max. 15 0,5 5 0,5 35 max. 15Typical Insertion Loss: Test Setup: 60 55 50 45 40 Common Mode 35 30 25 20 Differential Mode 15 10 5 0 0.01 0.1 1 10 Frequency MHz A (comm) A (diff) CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions SSt HasA DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany WE-CMB Common Mode Power Tel. +49 (0) 79 42 945 - 0 ORDER CODE Line Choke www.we-online.com 744825510 eiSos we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 005.004 Valid 2015-11-10 eiSos 2/5 XL This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Attenuation dB