Dimensions: mm Recommended Hole Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. 250 V (AC), 50/60 Hz V Rated Voltage 250 V max. R 250 V (DC) M4 I detail A Rated Current 40 C/ T< 60 K 3 A max. R Leakage Current I 250 V (AC)/ 50 Hz 0 mA typ. Leak R DC Resistance 20 C 100 m max. DC Inductance L 10 kHz/ 0.1 mA 10 mH +50%/-30% X2-Capacitance C 1 kHz/ 1 V 0.33 F 10% 5x 6,3 0,1 X 63,0 1,0 Discharge Resistance R 20 C 1000 k 10% 63,0 Insulation Test Voltage V 50 Hz/ 2 s/ 0,5 mA 2000 V (AC) max. L->PE T 1 Insulation Test Voltage 51,2 1,0 V 2 s/ 10 mA 1075 V (DC) max. L->N Scale - 1:2,5 T 2 8,9 min. 7,9 min. 19,8 1,0 Schematic: A 75,0 1,0 General Information: L L Operating Temperature -25 up to +100 C L1 Climatic Category 25/100/21 CX CX PE R Rated Temperature T 40 C R L2 Storage Conditions (in original < 40 C < 75 % RH packaging) N N Flammability Rating according to UL94 V-0 Moisture Sensitivity Level (MSL) 1 Leakage current is calculated according to IEC 60939-3. If the neutral line is interrupted, worst case leakage current could reach twice this level. There is no leakage current for DC applications. Scale - 1:2,5 L1 = L2 = L Mechanical Properties: Properties Value Unit Tol. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD Weight m 128 g typ. SBi 001.000 2021-10-07 DIN ISO 2768-1m DESCRIPTION WE-CLFS Line Filter Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 810912003112 74638 Waldenburg Germany BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos Valid 1/7 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 2x O 4,5 0,5 51,8 1,0 25,0 1,0 10,0 1,0 5x 0,8 0,03 18,8 1,0 29,0 1,0Certification: Typical Attenuation: RoHS Approval Compliant 2011/65/EU&2015/863 REACh Approval Conform or declared (EC)1907/2006 90 cURus Approval E502193 UL 60939-3/ CSA C22.2 NO. 8-13 VDE Approval 40048805 IEC/EN 60939-2 80 70 60 50 40 30 20 10 0 0.01 0.1 1 10 100 Frequency MHz 50/50 comm 50/50 diff CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD SBi 001.000 2021-10-07 DIN ISO 2768-1m DESCRIPTION WE-CLFS Line Filter Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 810912003112 74638 Waldenburg Germany BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos Valid 2/7 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Attenuation dB