865080753013 Wurth

Dimensions: mm Recommended Land Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 0.25 V/ 120 Hz/ +20 C C 47 F 20% Rated Voltage U 63 V (DC) max. R Leakage Current 2 min./ +20 C I 29.61 A max. LEAK Dissipation Factor 0.25 V/ 120 Hz/ +20 C DF 12 % max. Ripple Current 120 Hz 105 C I 119 mA max. RIPPLE Pw Fw1 fw1 pw OD Schematic: General Information: Aluminum Electrolytic Capacitors Storage Conditions 5-35 C, < 75% RH Vent Operating Temperature -55 C up to +105 C Endurance 2000 h / 63 V (DC) / max. Iripple Test conditions of Electrical Properties: +20C, 35% RH if not specified differently FIT according to separate documentation Component conform to REACh and RoHS requirements and standards Properties Value Unit Tol. Diameter D 8 mm 0.5 CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD Length L 10.5 mm max. EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m Width W 8.3 mm 0.2 Max-Eyth-Str. 1 DESCRIPTION TECHNICAL REFERENCE 74638 Waldenburg Material Thickness t 0.3 mm max. ASEE105470M063DVCTEB000 Germany WCAP-ASLI Aluminum Electrolytic Tel. +49 (0) 79 42 945 - 0 P 3.1 0.2 mm Fw1 0.35 +0/-0.05 mm Fw2 0.95 0.15 mm ORDER CODE Capacitors w www.we-online.com p 2.8 mm fw1 4.2 mm fw2 1.9 mm 865080753013 eiSos we-online.com w SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2017-01-18 eiCap 1/7 8.0 x 10.5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. + q W Fw2 L t fw2 -Product Marking: 1st Line Capacitance value: 47 F 2nd Line Rated Voltage: 63 3rd Line ASLI & datecode: YWW Multiplier for Ripple Current vs. Frequency C F / Frequency Hz 50 (60) 120 500 1K 10K 0.1 C 100 0.80 1.00 1.20 1.30 1.50 100 < C 0.80 1.00 1.10 1.15 1.20 CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION TECHNICAL REFERENCE 74638 Waldenburg ASEE105470M063DVCTEB000 Germany WCAP-ASLI Aluminum Electrolytic Tel. +49 (0) 79 42 945 - 0 ORDER CODE Capacitors www.we-online.com 865080753013 eiSos we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2017-01-18 eiCap 2/7 8.0 x 10.5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.