DRC60US48 XP Power

AC-DC Power Supplies DRC60 Series 60 Watts Compact lightweight design UxL62x368x-1 a nSd EeN6r23i6e8-1s approvals Class B conducted & radiated emissions Universal AC input range 85 to 264VAC Output voltages from 5V to 48V DC High efficiency DC output LED indicator -30C to +70C operating temperature 300VAC Input surge withstand MTBF = 300kHrs (MIL-HDBK-217F, +25C GB) Dimensions: 3 year warranty DRC60: 3.6 x 2.04 x 2.28 (92.6 x 52.0 x 58.0 mm) T he DRC range of compact lightweight DIN rail mount power supplies is a convenient and cost effective power conversion solution for many industrial and commercial applications. W ith inter national safety certification, an industrial temperature range and class B emission compliance, the DRC series also features a DC on LED, wide output voltage adjustment range and alter native DC input range. Models & Ratings Ripple & Noise Maximum (1) (2) Output Voltage Output Power Output Voltage Range Output Current Typical Efficiency Model Number pk-pk Capacitive Load 5V 33W 4.9 - 5.5V 6.5A 100mV 84% 20000F DRC60US05 12V 54W 10.8 - 13.8V 4.5A 120mV 88% 10000F DRC60US12 15V 60W 13.5 - 18.0V 4.0A 120mV 89% 8000F DRC60US15 24V 60W 21.6 - 29.0V 2.5A 150mV 90% 4000F DRC60US24 48V 60W 43.2 - 55.2V 1.25A 240mV 91% 680F DRC60US48 Notes 1. Output power rating must not be exceeded. 2. Efficiency measured at 230V AC fu oad. ll l Mechanical Details 2.283 (58.00) 2.047 (52.00) 0.197 (5.00) Output voltage adjustment DC on LED -Vo +Vo DRC60 xppower.com 0.394 (10.00) AC(N) AC(L) Notes 1. All dimensions in inches (mm) 4. Screw terminal wire gauge: 12-24AWG 2. Weight: 0.39 lbs (175 g) 5. Connection screw maximum torque: 4.0 lbs-in (0.4 Nm) 3. Tolerance: 0.039 in (1.0 mm) 6. Mounting rail type TS35 www.xppower.com 1 3.648 (92.66) 3.543 (90.00)AC-DC Power Supplies DRC60 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions (1) Input Voltage - Operating 85 264 VAC See input voltage derating curve. Alternatively 120-370VDC Input Frequency 47 50/60 63 Hz Input Current - Full Load 1.2/0.8 A 115/230 VAC Inrush Current 30/60 A At 115/230 VAC Earth Leakage Current 0.25 mA rms At 264 VAC, 60 Hz Input Protection Internal fuse fitted No Load Input Power 0.3/0.4 W Models below 48V output / 48V model output Input Surge 300 VAC Surge Withstand 300 Note 1. DC input voltage was not assessed as part of the safety certification process. Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 4.9 55.2 VDC See Models and Ratings table Initial Set Accuracy 2 % Output Voltage Adjustment See Models and Ratings table, output power rating must not be exceeded Minimum Load 0A No minimum load required Capacitive Load F See Models & Ratings table Start Up Delay 3s Rise time 4ms Hold Up Time 15/80 ms At full load and 115 VAC/230 VAC Line Regulation 0.5 % Load Regulation 1.5 % Max deviation recovering to within 2% in 2ms for Transient Response 4% a 50% load change. Measured at 20 MHz bandwidth. S ee Models & Ratings Ripple & Noise mV pk-pk table 7.5 DRC60US05 16 DRC60US12 Overvoltage Protection V 20 DRC60US15 36 DRC60US24 60 DRC60US48 Overload Protection 120 % Auto recovery Short Circuit Protection Trip and Restart (Hiccup Mode) Temperature Coefficient 0.02 %/C General Characteristic Minimum Typical Maximum Units Notes & Conditions Isolation: Input to Output 4000 VAC Switching Frequency 65 kHz Output LED Green LED to indicate output on Mean Time Between Failure 300 kHrs MIL-HDK-217F 25C Case Material Black plastic UL94V-0 rated Weight 0.039 (175g) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -30 +70 C See thermal derating curve Storage Temperature -40 +85 C Cooling Natural convection Operating Humidity 95 %RH Non-condensing Operating Altitude 2000 m Vibration and Shock Tested to GB/T2423.10-2008 and GB-T2423.22-2002 www.xppower.com 2