FHSAA03A1FR XP Power

EMI Filter XPPower FHSA Chassis Mount Filter Chassis Mount Filter xxx Series Single Stage Design Compact Design ITE Applications 1, 3, 6, 10, 15 & 20A Rating 6.3 x 0.8mm Faston Terminals Bleed Resistor Shielded Metal Body Wide Operating Temperature Range 3 Year Warranty The FHSA single stage filters are housed in a compact, chassis mounting metal case, for ITE applications. Input and output connections are via 6.3 x 0.8mm Faston terminals. The filter should be fitted as close as possible to the mains cable entry point to minimize any radiated emissions from the mains cable within the equipment. Suitable for class I appliances, all models feature a shielded metal body, and are fitted with a bleed resistor to safely discharge the filter capacitors when power is disconnected. Safety approvals are EN60939-2 for passive filters & ANSI/UL1283 for EMI filters. They feature a wide operating temperature range of -40C to +110C with full power operation up to +50C. Specifications Characteristics Minimum Typical Maximum Units Notes and Conditions Rated Voltage 250 VAC Input Frequency DC 400 Hz Rated Current 1 20 A See models and ratings table Earth Leakage Current 0.3 0.6 mA See models and ratings table MTBF 2.2 MHrs MIL-HDBK 217F, 230 VAC at 40C Flammability Rating UL94V-2 Temperature Operating -40 110 C See derating curve EN60939-2 Passive filter units for EMI suppression Safety Approvals ANSI/UL1283 Electromagnetic Interference Filters Terminals Faston 6.3 x 0.8mm straight Protection Class Suitable for appliances with protection Class I Dielectric Strength 1500 VAC Electrical Schematic L L Cy Cx R L Cy N N PE PE www.xppower.com 1EMI Filter XPPower FHSA Models & Ratings Leakage current Capacitance Rated Inductance Resistance Weight Application Mounting Filter current at 10 kHz, 0.25 V 115VAC/60Hz 250VAC/50Hz Cx Cy 1 A 0.3 mA 0.6 mA 2 x 10 mH 0.1 F 2 x 3.3 nF 1 M 37g ITE Chassis FHSAA01A1FR 3 A 0.3 mA 0.6 mA 2 x 1.2 mH 0.1 F 2 x 3.3 nF 1 M 37g ITE Chassis FHSAA03A1FR 6 A 0.3 mA 0.6 mA 2 x 0.8 mH 0.1 F 2 x 3.3 nF 1 M 43g ITE Chassis FHSAA06A1FR 10 A 0.3 mA 0.6 mA 2 x 0.3 mH 0.1 F 2 x 3.3 nF 1 M 43g ITE Chassis FHSAA10A1FR 15 A 0.3 mA 0.6 mA 2 x 0.8 mH 0.1 F 2 x 3.3 nF 99g ITE Chassis FHSAA15A2FR 1 M 20 A 0.3 mA 0.6 mA 2 x 0.6 mH 0.1 F 2 x 3.3 nF 94g ITE Chassis FHSAA20A2FR 1 M Thermal Derating 100 80 60 40 20 0 -40 -20 0 20 40 60 80 100 120 Ambient Temperature (C) Mechanical Details All dimensions in inches (mm) FHSAAxxA1FR FHSAAxxA2FR 0.99 1.37 (25.2) (35.0) 0.6 1.18 0.94 1.27 (32.5) (24.0) (30.0) (17.5) 1.06 0.83 2.15 2.12 (21.2) (27.0) (54.1) (54.5) 1.73 1.71 2.54 2.5 (43.5) (44.0) (63.9) (64.5) 2 0.2 (5.3) 2 0.18 (4.8) x 0.24 (6.3) 0.39 (10.0) 0.37 (9.5) www.xppower.com 2 Current (%)