JWK1048D05

DC-DC Converter XPPower JWK10 Series 10 Watts Regulated Single & Dual Output xxx Series Wide 4:1 Input Range 1 x 1 Package 1500 VDC Isolation Operating Temperature -40 C to +100 C ITE Safety Approvals Remote On/Off Optional Heatsink Six Sided Metal Case Dimensions: 3 Year Warranty JWK10: 1.00 x 1.00 x 0.40 (25.4 x 25.4 x 10.16 mm) Models & Ratings (3) Output current Input current Maximum Input voltage Output voltage Efficiency Model number (2) capacitive load Min Max No load Full load 3.3 V 330 mA 2.20 A 350 mA 560 F 86% JWK1024S3V3 5 V 300 mA 2.00 A 495 mA 560 F 84% JWK1024S05 5.1 V 300 mA 2.00 A 505 mA 560 F 84% JWK1024S5V1 12 V 125 mA 0.83 A 485 mA 150 F 86% JWK1024S12 9-36 V 15 V 100 mA 0.66 A 30 mA 475 mA 150 F 87% JWK1024S15 24 V 62 mA 0.41 A 475 mA 68 F 86% JWK1024S24 5 V 150 mA 1.00 A 495 mA 220 F 84% JWK1024D05 12V 62 mA 0.41 A 475 mA 100 F 86% JWK1024D12 15V 50 mA 0.33 A 475 mA 100 F 87% JWK1024D15 3.3 V 330 mA 2.20 A 180 mA 560 F 85% JWK1048S3V3 5 V 300 mA 2.00 A 250 mA 560 F 84% JWK1048S05 5.1 V 300 mA 2.00 A 255 mA 560 F 84% JWK1048S5V1 12 V 125 mA 0.83 A 240 mA 150 F 86% JWK1048S12 18-75 V 15 V 100 mA 0.66 A 20 mA 235 mA 150 F 87% JWK1048S15 24 V 62 mA 0.41 A 240 mA 68 F 86% JWK1048S24 5 V 150 mA 1.00 A 250 mA 220 F 84% JWK1048D05 12 V 62 mA 0.41 A 240 mA 100 F 86% JWK1048D12 15 V 50 mA 0.33 A 235 mA 100 F 87% JWK1048D15 Notes 1. Input currents measured at nominal input voltage. 3. Maximum capacitive load is per output. 2. Input current is typically 10 mA at nominal input voltage when output is 4. Add suffix -HK for optional heatsink. turned off using remote on/off. Mechanical Details Pin Connections Optional Heatsink (-HK) 1.00 (25.4) 0.64 (16.3) Max. Pin Single Dual 0.10 0.40 (10.16) 0.40 (10.16) 0.24 0.40 0.02 (2.54) 1 +Vin +Vin (6.0) (10.16 0.5) 2 -Vin -Vin 3 +Vout +Vout 3 4 5 4 No Pin Common 5 -Vout -Vout 6 Remote On/Off Remote On/Off Bottom View 0.69 (17.46) Max. 0.77 (19.50) Max. 0.04 1.22 (31.0) Max. (1.00) Notes Heat-Sink 1 26 1. All dimensions are in inches 3. Tolerance: X.XX0.01 (X.X0.25) Thermal Pad (mm) X.XXX0.005 Clamp 2. Weight: 0.03 lbs (15.0g) (X.XX0.13) 0.20 0.30 0.10 Converter (5.08) (7.62) (2.54) approx. 4. Pin Tolerance: 0.002 (0.05) www.xppower.com 1 0.80 (20.3) 1.00 (25.4)DC-DC Converter XPPower JWK10 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 9.0 36 VDC 24 V nominal Input Voltage Range 18.0 75 VDC 48 V nominal Input Filter Internal Pi type 50 24 V models Input Surge VDC for 1 s 100 48 V models ON at >8.5 V, OFF at <9 V 24 V models Undervoltage Lockout ON at >18 V, OFF at <17 V 48 V models ON: Logic high (2.5-50 V) or open circuit Remote On/Off OFF: Logic low (<1.0 V) or short pin 2 to pin 6 Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 3.3 30 VDC See Models and Ratings table Initial Set Accuracy 2.0 % At full load Output Voltage Balance 1.0 2.0 % For dual output with balanced laods Minimum Load A No minimum load required Line Regulation 1.0 % From minimum to maximum input at full load Load Regulation 0.5/1.0 % Single / Dual output, from 0 to full load On dual output models when one load is varied between Cross Regulation 5.0 % 25% and 100% and other is fixed at 100% Recovery within 1% in less than 600 s for a 25% load Transient Response 3 6 % deviation change. 20 MHz bandwidth. Measured using 0.47 F ceramic Ripple & Noise 100 mV pk-pk capacitor. Overload Protection 150 % Short Circuit Protection Continuous Trip & Restart (Hiccup mode), with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 86 % See Models and Ratings table Isolation: Input to Output 1500/1800 VDC 60 s/1 s 9 Isolation Resistance 10 At 500 VDC Isolation Capacitance 1500 pF Switching Frequency 450 kHz 3 Power Density 50.8 W/in Mean Time Between Failure 350 kHrs MIL-HDBK-217F, +25 C GB Weight 0.03 (15.0) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +100 C See Derating Curve. Storage Temperature -50 +125 C Case Temperature +100 C Humidity 95 %RH Non-condensing Cooling Natural convection www.xppower.com 2