Medical Open Frame 65 Watts THE XPERTS I N POWER PBM65 Series 4000 VAC Isolation Low Leakage Current Meets Class B, EN55011 Conducted Medical Safety Agency Approvals Both Line and Neutral Fused Fixed Switching Frequency Specification Input General Input Voltage 85-264 VAC Efficiency 66% minimum for 5 V models 75% minimum for all others Input Frequency 47-63 Hz MTBF 400,000 hrs min MIL-HDBK-217F Input Current 1.6 A max at 115 VAC 1.0 A max at 230 VAC Switching Frequency 42 kHz 5 kHz Inrush Current 17 A max at 115 VAC Isolation Voltage 4000 VAC Input to Output 40 A max at 230 VAC 1500 VAC Input to Output 500 VAC Output to Ground Earth Leakage 90 A max at 115 VAC, 60 Hz Current 150 A max at 230 VAC, 50 Hz Size 5.0 x 3.0 x 1.2 127.00 x 76.20 x 30.48 mm Output Weight 330 g approx (PCB format) Output Voltage 5.1 to 28 VDC Environmental Output Voltage 5% Adjustment Operating 0 C to +70 C Temperature Derate linearly from 100% load at Output Power 65 Watts +50 C to 50% load at +70 C Minimum Load No minimum load required Cooling Convection cooled Line Regulation 0.5% max at full load Relative Humidity 5-95% non-condensing Load Regulation 2% typical Storage -40 C to +85 C Ripple and Noise 1% pk-pk max (See Note 2) Temperature Transient Response 4% maximum deviation, 500 s recovery time to within 1% for a EMC & Safety 25% load change Safety Approvals UL2601-1, CSA C22.2 No 601.1, Temperature 0.04%/C EN60601-1 CE Mark (LVD) Coefficient EMI/EMC EN55011 (CISPR11) Class B and Hold Up Time 10 ms minimum at 110 VAC FCC Part 18 Level B radiated & Overvoltage 112-132% with auto recovery conducted Protection ESD EN61000-4-2, Level 3 air, Overcurrent 125-200% with auto recovery Level 2 contact, Perf Criteria A Protection Radiated Immunity EN61000-4-3, 3 V/m, Perf Criteria A Short Circuit Trip & restart with auto recovery EFT/Burst EN61000-4-4, Level 3, Perf Criteria A Protection Surge EN61000-4-5, Level 3, Perf Criteria A Remote Sense Compensates for up to 0.5 V drop www.xpplc.com sales xpplc.comAC-DC Power Supplies Medical Open Frame 65 Watts PBM65 Series OUTPUT VOLTAGE & CURRENT RATINGS PBM65 Maximum Output Output Total Model (1) Output Power Voltage Current Regulation Number 51 W 5.1 VDC 10.0 A 3% PBM65US05 65 W 12.0 VDC 5.5 A 2% PBM65US12 65 W 15.0 VDC 4.4 A 2% PBM65US15 65 W 18.0 VDC 3.7 A 2% PBM65US18 65 W 24.0 VDC 2.8 A 2% PBM65US24 65 W 28.0 VDC 2.4 A 2% PBM65US28 Notes 1. Total regulation includes line and load regulation and set point accuracy. 2. Ripple and noise measured with 20 MHz bandwidth with 10 F tantalum capacitor in parallel with a 0.1 F ceramic capacitor. Mechanical Details P3 PIN CONNECTIONS Pin Function 1 Output 1 2 Output 1 3 Output 1 4 Return 5 Return 6 Return NOTES: 1. Dimensions shown in inches (mm). 2. Tolerance 0.02 (0.5) maximum. 3. Input connector mates with molex housing 09-50-3031 and Molex 2878 series crimp terminal. 4. Output connector mates with molex housing 09-50-3061 and Molex 2878 series crimp terminal. 5. P4 is for sense connector mates with molex housing 22-01-1023 and molex 40445 series crimp terminal. 6. Loom kits with 300 mm wire available, order part number PBM65 LOOM. 7. For mating connectors only, order part number PBM65 CONKT. 8. Covers available, order part number PBM65 COVER. 9. Weight: 330 g (PCB format). www.xpplc.com sales xpplc.com Rev 3.0