xppower.com 150 Watts VEH Series Energy Efficiency Level V CEC 2008 / EISA 2007 / ErP Compliant No Load Input Power <0.35 W 5000 m Operating Altitude Single Outputs from 12 V to 24 V Low Cost 3 Year Warranty BRAND Specification Input General Input Voltage 90-264 VAC, see note 1 Efficiency See table Input Frequency 47-63 Hz Energy Efficiency Level V Input Current 2.0 A max at 90 VAC Isolation 3000 VAC Input to Output, 1500 VAC Input to Ground Inrush Current 150 A max at 230 VAC, cold start at 25 C Negative output is connected to Ground Earth Leakage Current <500 A at 230 VAC/50 Hz Switching Frequency PFC: 38-380 kHz, PWM: 47-70 kHz Power Factor >0.95 at 230 VAC and full load 3 Power Density 4.5 W/in No Load Input Power <0.35 W MTBF >145 kHrs to MIL STD 217F at 25 C GB Input Protection Internal T4.0A/250 V fuse in line Environmental Output Operating Temperature 0 C to +60 C derate linearly from 100% load at +40 C to 50% load at +60 C, Output Voltage See table Storage Temperature -20 C to +85 C Initial Set Accuracy 5% at 50% load Operating Humidity 5% to 90% RH non-condensing Minimum Load No minimum load requirement Shock 6 Random drops from 0.7 m with no Hold Up Time 8 ms typical at 115 VAC, full load damage, 50 g for 20 ms in each of 3 axes Start Up Delay 3 s max Operating Altitude 5000 m Start Up Rise Time 60 ms max Vibration Operating: 10-250 Hz, 1/4 g pk-pk, 3 axes, Overshoot 3% max 15 min sweep Transient Response 4% maxiumum deviation, recovering to Non Operating: 10-300 Hz, 2 g pk-pk, 3 less than 1% within 500 s for a 50% axes, 15 min sweep step load change Storage Humidity 5% to 95% RH non-condensing Line Regulation 0.5% max Load Regulation 3% max EMC & Safety Ripple & Noise 1.5% for 12 V, 1% for 19/24 V pk-pk max, 20 MHz bandwidth (see note 2) Emissions EN55022, level B conducted & radiated Overvoltage Protection See table Harmonic Currents EN61000-3-2 class A, Overload Protection 105-150% EN61000-3-2 class C >60% load Short Circuit Protection Continuous (hiccup/trip & restart mode Voltage Flicker EN61000-3-3 with auto recovery) ESD Immunity EN61000-4-2, level 3 Perf Criteria A Temperature 0.04%/C Radiated Immunity EN61000-4-3, 3 V/m Perf Criteria A Coefficient EFT/Burst EN61000-4-4, level 2 Perf Criteria A Surge EN61000-4-5, installation class 3, Perf Criteria A Conducted Immunity EN61000-4-6, level 2 Perf Criteria A Magnetic Field EN61000-4-8, 3 A/m Perf Criteria A Dips & Interruptions EN55024, 100% 10 ms, 30% 500 ms, 100% 5000 ms, Perf Criteria A, A, B Safety Approvals EN60950-1, UL/cUL60950-1 AC DCAC DC VEH150 Models and Ratings (3) (4) Output Power Output Voltage Output Current OVP Setting Effeciency Model Number 150 W 12.0 V 12.50 A 20.0 V 91% VEH150PS12 150 W 19.0 V 7.90 A 27.0 V 91% VEH150PS19 150 W 24.0 V 6.25 A 34.0 V 91% VEH150PS24 Notes 1. 12 V version output derates linearly from 150 W at 100 VAC to 135 W at 3. Typical values. 90 VAC. 4. Average of efficiencies measured at 25%, 50%, 75% and 100% load and 2. Measured at the output connector with a 0.1 F ceramic capacitor and a 230 VAC input. 10 F electrolytic capacitor at room temperature. Mechanical Details 1 3 2 4 Pin Function 1 Output + 2 Output + 3 Return* 4 Return* Shell Ground *Return is internally connected 6.85 to Ground (174.0) Power Cord, Order Part: UK - UK-MAINS-IEC European - EU-MAINS-IEC US - US-MAINS-IEC 1.65 2.91 (42.0) (74.0) IEC320-C14 Notes 1. All dimensions shown in inches (mm). Tolerance is 0.04 (1.0) maximum, except output cable length. 2. Weight 1.57 lbs (710 g) approx. 3. Cable length is 47.2 0.8 (1200 20 mm) approx. 4. Output connector (Power Mini Din) mates with Kycon KPJ-4S or equivalent. 19-Sept-13