2238-861-15568 Yageo

DISCRETE CERAMICS DATA SHEET Class 1, NP0 50/100/200/500 V Noble Metal Electrode Surface-mount ceramic multilayer capacitors Product specification 2001 Jul 16 Rev.6 Supersedes data of 11th September 2000 www.phycomp-components.comPhycomp Product specification Surface-mount ceramic Class 1, NP0 50/100/200/500 V multilayer capacitors Noble Metal Electrode FEATURES QUICK REFERENCE DATA Six standard sizes DESCRIPTION VALUE High capacitance per unit volume Rated voltage U (DC) 50 V, 100 V, 200 V and 500 V (IEC) R Supplied in tape on reel or in bulk Capacitance range (E12 series) case (case sizes 0402, 0603 and note 1: 0805 only) 50 V note 2 0.47 pF to 22 nF For high frequency applications 100 V 10pFto22nF NiSn terminations. 200 V 10 pF to 5.6 nF 500 V 10 pF to 3.3 nF APPLICATIONS Tolerance on capacitance: Consumer electronics C 10 pF 5% 2% Telecommunications C<10pF 0.5 pF 0.25 pF Automotive Test voltage (DC) for 1 minute: Data processing. 50 V and 100 V 2.5 U R 200 V 3 U R DESCRIPTION 500 V 2 U R Sectional specifications IEC 60384-10, second edition 1989-04 The capacitor consists of a also based on CECC 32 100 rectangular block of ceramic dielectric in which a number of interleaved Detailed specification based on CECC 32 101-801 precious metal electrodes are Climatic category (IEC 60068) 55/125/56 contained. This structure gives rise to Notes a high capacitance per unit volume. 1. Other values below 10 pF and non E12 series are available on request. The inner electrodes are connected to 2. Also applicable for applications up to 63 V. the two terminations, either by silver palladium (AgPd) alloy, or silver dipped with a barrier layer of plated nickel and finally covered with a layer of plated tin (NiSn). A cross section of terminations the structure is shown in Fig.1. electrodes MLB457 ceramic material Fig.1 Construction of a ceramic multilayer capacitor. 2001 Jul 16 Rev.6 2 www.phycomp-components.com