NTC (Negative Temperature Coefficient) Thermistors NRG family, 10000 ohm, F Tol. 2 Lug.
FEATURES
Epoxy sealed radial NTC thermistor
Temperature sensing, quick response time
Bead with ring lug
Wide resistance range:1 kO to 470 kO
Non-linear change in resistance vs temperature
APPLICATIONS
ndustrial Process Control
Commercial appliances
Battery, supercapacitor and energy storage systems
Uninterruptible power suppli..
View Products

PTC Thermistors, Inrush Current Limiter High Energy. These directly heated ceramic-based doped barium titanate thermistors have a positive temperature coefficient and are primarily intended for inrush current limiting and overload protection.
FEATURES
Higher energy absorption levels up to 300 J
High number of inrush-power cycles:> 100 000 cycles
Highly resistant against non-switching peak-powers of up to 25 kW
Can handle high direct voltage up to 1200 V
View Products

USB Type-C 6-pin Vertical Plug for Docking Applications is a vertical mount, Power Only USB Type-C plug with 50% less extraction force than standard USBs. Designed with docking in mind but suitable for many other applications, USB4180 has a vertical profile of 11.16mm. GCT USB4180 Vertical Plug also features a robust thermoplastic base, four through-hole shell stakes, and two locating pegs to ensure easy placement and long-term reliability.
FEATURES
50% reduction in extractio..
View Products

RJ45 Horn type receptacle,D-shape metal flange without latch lock IP65 rating to optimally protect your device or equipment from water ingress. Air-tightness feature protect your device from Air ingress.
FEATURES
Robust design to withstand harsh environments and frequent use, ensuring long-lasting performance
IP65 protection when mating with REAN Z series corresponding Ethernet connector or rubber cap closed
UL94 V-0 rated materials
Sealed chassis protects i..
View Products

MF-NSMF models are intended for reflow soldering (including, but not limited to heating plate, hot air, IR, nitrogen, and vapor phase). Wave soldering is permissible only if the device is on the top of the PCB, opposite the heat source. Hand soldering is not recommended for these devices. All temperatures refer to the topside of the device, measured on the device body surface. If reflow temperatures exceed the recommended profile, devices may not meet the published specifications. Compatib..
View Products