PI5A4157CEX

PI5A4157 Low Voltage SPDT 0.8 Analog Switch Features Description CMOS Technology for Bus and Analog The PI5A4157 is a high-bandwidth, fast single-pole Applications double-throw (SPDT) CMOS switch. It can be used as Low On-Resistance: 0.8 at 3.0V an analog switch or as a low-delay bus switch. The Wide V Range: 1.65V to 5.5V device features ultra low RON of 0.8 typical at 3.0V CC Rail-to-Rail Signal Range VCC and will operate over the wide VCC range of Control Input Overvoltage Tolerance: 5.5V(Min) 1.65V to 5.5V. Fast Transition Speed: 12ns at 5.0V The PI5A4157 features very low quiescent current even High Bandwidth: 150 MHz when the control voltage is lower than the VCC supply. Extended Industrial Temperature Range: This feature services the mobile handset applications -40C to 85C very well by allowing direct interface with baseband Packaging (Pb-free & Green): processor general purpose I/Os. -6-pin SOT23 Break-before-make switching prevents both switches -6-pin SC70 being enabled simultaneously. This eliminates signal -6-Pin UDFN 1mm1mm disruption during switching. The control input, S, is independent of supply voltage. Applications Cell Phones PDAs Portable Instrumentation Battery powered Communications Computer Peripherals Pin Assignment B1 1 6 S GND 1 6 V CC VCC GND 2 5 B0 2 5 B1 4 S A 3 B0 3 4 A SOT23-6 and SC70-6(Top View) UDFN-6 11 (Top View) Pin Description Logic Function Table Pin No Logic Pin Function Description Inputs(S) SOT23-6 UDFN-6 Name SC70-6 11 0 B connect to A 0 1 5 B1 Data Port 1 B connect to A 1 2 1 GND Ground 3 2 B0 Data Port (Normally connected) 4 3 A Common Output/Data Port 5 6 V Positive Power Supply CC 6 4 S Logic control All trademarks are property of their respective owners. www.diodes.com 1/18/2017 2017-01-0009 PT0386-4 1 PI5A4157 Maximum Ratings Note: Storage Temperature...-65 to +150 Stresses greater than those listed under MAXIMUM Ambient Temperature with Power Applied......................-40 to +85 RATINGS may cause permanent damage to the Supply Voltage V ..-0.5V to +7.0V CC device. This is a stress rating only and functional DC Switch Voltage V -0.5V to V +0.5V S CC operation of the device at these or any other DC Input Voltage V ..-0.5V to +7.0V conditions above those indicated in the operational IN sections of this specification is not implied. DC Output Current V .128mA OUT Exposure to absolute maximum rating conditions DC V or Ground Current I /I 100mA CC CC GND for extended periods may affect reliability. Junction Temperature under Bias (TJ) ...........................................150C Junction Lead Temperature (TL) (Soldering, 10 seconds) ................................................................ 260C ESD HBM .................................................................................5KV Power Dissipation (PD) +85C ...................................SOT23 250mW SC70 200mW UDFN1x1 150mW Recommended Operating Conditions Symbol Parameter Conditions Min. Typ. Max. Unit V Operating Voltage - 1.65 - 5.5 V CC V Control Input Voltage - 0 - V V IN CC V Switch Input Voltage - 0 - V V S CC V Output Voltage - 0 - V V OUT CC T Operating Temperature - -40 25 85 C A Control Input VCC = 2.7V to 3.6V 0 - 10 ns/V t , t Input Rise and Fall Time r f Control Input VCC = 4.5V to 5.5V 0 - 5 ns/V Note: Control input must be held HIGH or LOW it must not float. All trademarks are property of their respective owners. www.diodes.com 1/18/2017 2017-01-0009 PT0386-4 2