E3X-MC11-C1 Omron

Digital Fiber Amplifier E3X-DA-N CSM E3X-DA-N DS E 7 2 Note: Manufacturing of the E3X-DA TW Series was discontinued at the end of March 2012. Manufacture of the E3X-DA11-N/DA41-N/DA11D/DA6/DA8/DA6D will be discontinued in March 2017. The Ultimate Fiber Amplifier for Maximum Ease of Use and High Performance Be sure to read Safety Precautions on page 23. UL991* * UL certification including UL 991 testing and evaluation Applicable standards: UL 3121-1 Additional application testing and evaluations standards: UL 991 and SEMI S2-0200S Features Models with New Connector System Super Digital Display with Auto Power Reduces Wiring, Saves Space, and Makes Control (APC) Circuit Maintenance Easier First in the Industry First in the Industry Patent Pending The passage of time causes the intensity of the Sensor s light- emitting LED elements to deteriorate, which may make stable In Amplifiers with wire-saving connectors, the power supply is detection impossible. distributed to 1-conductor slave connectors through a 3- The E3X-DA-N is the first series of Fiber Sensors to use an conductor master connector. This design has three major Auto Power Control (APC) circuit. This achieves strict advantages. detection by eliminating fluctuation in the digital value and is 1. Wiring time is significantly reduced. ideal for subtle detection such as stable detection of liquid- 2. Relay connectors are unnecessary, so wiring takes up less crystal glass. space and costs are reduced. 3. Storage and maintenance are simpler because it isn t Incident level necessary to distinguish between master connector and slave connectors on the Amplifier. 3000 Simplified Connector Design Up to 16 Amplifiers can Previous Digital Threshold be connected. Fiber Amplifiers Unstable detection Time Incident level 3000 E3X-DA-N Series Threshold Optical communi- cations Stable detection Power supply pin Master connector Slave connector Time 1E3X-DA-N Power Consumption Reduced by As Much Digital Display Can Be Turned OFF or As 70% Dimmed during Operation Eco-mode Power consumption is When the digital display is viewed infrequently during reduced by as much as 70% operation, current consumption can be reduced by dimming from 1800 mW to 600 mW 1800 mW the display or turning it OFF entirely. (when the digital display is (Eco-mode can be set from the Mobile Console only.) OFF). 600 mW Previous model E3X-DA-N This eco-label is displayed on (with digital display OFF) products that meet environmental standards established by OMRON. New Generation of Mobile Consoles the Size of Cellular Phones. Further Developing the Ultimate Power of Fiber Amplifiers. With group teaching, teach multiple amplifiers Remote Setting and Adjustment simultaneously. Perform settings, teaching, and fine adjustments at the end of the Fiber Unit. The tedious teaching that had Group teaching to be performed separately for Previously, settings and each Amplifier can now be teaching could be performed performed for several only on the Amplifier. Now, Amplifiers at once using the however, using a Mobile Mobile Console. Console enables these operations at the end of the fiber. Strict adjustments can be made while checking the workpiece Eliminate inconsistency by using group zero reset. position. The group zero reset function can simultaneously reset the digital displays of multiple Display the light intensity and threshold at the same time. Amplifiers to 0. This function is useful to minimize variation between Amplifier values. New Concept Patent Pending Flash the Sensor head and display the amplifier channels during operation. Even if the Amplifier and Sensor Function indicator head are separated during section operation, it is still possible to Channel setting flash the Sensor head and section display the amplifier channels. Light intensity monitor Channel 5 Threshold Channel 4 Channel 3 Channel 2 Channel 1 Operation keys Battery monitor Optical communications Head 2