E3X-NA11 Omron

Super Manual Fiber Amplifier E3X-NA Adjuster type standard that is the culmina- tion of true ease and simplicity Features Self-explanatory LED bar displays of light SameWire-savin Connector as levels E3X-DA-N The previous manual type used the stability and incident level OMRON s original wiring-saving connector, which was inher- indicators to display the light level change, which was difficult ited from the digital fiber amplifier E3X-DA-N, allows connec- to understand at a glance. The E3X-NA uses the LED bars to tion of up to 16 units. display the light level, ensuring the light level change at a glance. Gang-mount up to 16 Amplifiers Operation indicator Approx. 20% or lower Optical Approx. 10% or lower commu- nications Unstable level Approx. -10% or higher Power supply pin Approx. -20% or higher Slave connector Master connector * The vertical movement of the LED light level and operation display shows the light level at a glance. E3X-NA Conventional model E3X-NA A-441 E3X-NAFeatures Reduced wiring and space requirements for Optical Communications to Prevent Mutual power lines Interference Example for 5 Amplifiers E3X-NA Series Optical communication between amplifiers prevents mutual interference. Up to 5 fiber heads can be installed closely, ex- E3X-NA series Example for 5 Amplifiers cept E3X-NA F. No relay connectors required. 7 lines Power supplied from master amplifier through master connector to slave amplifiers. Less space required. Reduced Wiring and Space Requirements for Power Lines Optical commu nications Up to 5 15 lines Amplifiers Five previous Power and output lines required amplifiers for each amplifier. Relay connectors Same Sensing Distance as Previous Long- distance Models Dimensions and Designs Inherited from the 200 mm Reflective Models E3X-DA-N Digital Fiber Amplifier Standard: 100mm E3X-A Long-distance: Standard-feature E3X-H OFF delay timer 200mm Digital Fiber Amplifier E3X-DA-N E3X-NA Standard model 50mm 100mm 150mm 200mm Sensing distance Note: The above characteristics are ensured * The E3X-NA Series does not with the E32-D11L Reflective Sensor have a long-distance model. (long-distance model). Non-removable hinged co Approximately Seven Times the Detection Accuracy Super manual Amplifier Applied Fiber: E32-T16P (screen fiber) set at 100 mm. E3X- E3X-NA 10mm 8-turn adjustment knob for A1 1 (previous model) Minimum detection object: 2.0 mm dia. precise adjustment (with indicator) Same 10-mm width as the E3X-DA-N Digital E3X-NA 0.3 mm dia. Easy-to-see indicator Fiber Amplifier (Previously 12 mm) Same shape as the E3X-DA-N Digital Fiber Amplifier Applied Fiber: E32-T16 (screen fiber) set at 100 mm. E3X-A11 (previous model) E3X-NA Minimum detection object: 2.0 mm dia. 0.3 mm dia. Addition of high-speed type and waterproof type to the series A-442 Advanced Photoelectric Sensors 7 times Output lines separate Output lines and power lines from power