Sensing Band F03-16PE SUS316 used for core and polyethylene used for sheath to en- sure high resistance to both acidic and alkaline liquids. Sensing Band Stickers that use the same material as the Sens- ing Bands insulating resin are available in 2 types: adhesive- tape type and screw type. Ordering Information Name Model number Remarks Liquid Leakage Sensing Band F03-16PE --- Sensing Band Stickers F03-26PES 30 Stickers per set F03-26PEN 30 Stickers per set Specifications Sheath Polyethylene Core SUS316 stainless steel Ambient operating temperature 15 to 55 q C Weight Approx. 16 g (1 m) Dimensions (Unit: mm) Sensing Band Appearance Structure 4 1.2 20 1.7 8 Materials: Electrodes: SUS316 stainless steel, Sheath: Polyethylene Sensing Band Stickers F03-26PEN (screws) F03-26PES (adhesive tape) Appearance Structure 19.2 32 5 3.0 13 13 Adhesive tape (See note.) Cut section Material: Polyethylene 22 3.5 dia.** Material: Polyethylene Note: The shape of the adhesive tape shown above is for securing the F03-16PE. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. Sensing Band F03-16PT Compared to the F03-16PE (polyethylene), the F03-16PT has higher resistance to both high temperatures and chemicals. Small holes enable the detection of leakage even when installed upside down. Ordering Information Name Model number Remarks Fluoroplastic Sensing Band F03-16PT --- Fluoroplastic Sensing Band Stickers F03-26PTN 10 Stickers per set Specifications Sheath PTFE fluoroplastic Core SUS316 stainless steel Ambient operating temperature 50 to 200 q C Weight Approx. 16 g (1 m) Dimensions (Unit: mm) Sensing Band Appearance Structure 1.7 1.2 10 5 2.7 19/0.12 0.6t SUS316 Materials: Electrodes: SUS316 stainless steel, Sheath: Fluoroplastic Sensing Band Stickers F03-26PTN (screws) Appearance Structure 25 3.0 12 15 Two, 3.5 dia. Material: Fluoroplastic PTA Note: The shape of the adhesive tape shown above is for securing the F03-16PE. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice.