3M Mini D Ribbon (MDR) Cable Assembly
.050 High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC
Supports LVDS Channel Link signaling
20 shielded pairs (100 ohm) +4 drains for
high bandwidth applications
High density 50 position MDR with rugged
ribbon type contact
3 Unshielded Twisted 28 AWG Pairs
EMI shielded junction shell in either plastic
or over-molded construction
Rugged thumbscrew retention
RoHS* compliant
TS-2103-03
Date Modified: May 12, 2006
Sheet 1 of 4
Physical
Connector Contact Plating
Wiping Area: 30 [ 0.76m ] Min. Gold
Shell
Color: Beige
Material: Acrylonitrile Butadiene Styrene (ABS)
Cable
Color: Beige
Jacket Material: Polyvinyl Chloride (PVC)
Flammability: AWM VW-1
Electrical
Voltage Rating: 30 V
Current Rating: 1 A
8
Insulation Resistance:
> 1 10 at @100 Vdc
Withstanding Voltage: 350 Vrms for 1 minute
Individually Shielded Twisted Pairs
Characteristic Impedance:
100 10
Conductor Size:
28 AWG Stranded
Propogation Velocity:
1.25 ns/ft [4.1 ns/m ]
Environmental
Temperature Rating:
-20C to +75C
*RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic EquipmentRoHS complian means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
Channel Link is a trademark of National Semiconductor.
UL File No.: E86982
3M
3M is a trademark of 3M Company.
Interconnect Solutions For technical, sales or ordering information call
3M Mini D Ribbon (MDR) Cable Assembly
.050 High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC
Over-Molded #4-40 Thumbscrew
50 Position
50 Position
High Density
High Density
Mini D Ribbon
Mini D Ribbon
(MDR) Male Plug
(MDR) Male Plug
Cable
(See pinout for
cable construction)
2X Thumbscrew
2X Thumbscrew
#4-40 thread
#4-40 thread
45.7 45.7
LENGTH
1.8 1.8
(See ordering information)
54.9
2.2
6 8 10 12 14 16 18 20 22 24
2 4
1
3 5 7 9 11 13 15 17 19 21 23 25
15.5
0.6
26 34
28 30 32 36 38 40 42 44 46 48 50
27 35
29 31 33 37 39 41 43 45 47 49
46.5
1.8
mm
Assembly Length Tolerance
[Inch]
Cable Length:
Tolerance Unless Noted
0.5 to 1.5 meters -0 + .05 meters
0.00
0.0
2 to 10 meters -0 +3% of length
mm .1 .10
Generic End Detail
[ ] Dimensions for
MDR 50 Position Plug
Reference only
( Both Ends )
Ordering Information
14X50-SZWB-XXX-0NC
Backshell Options:
Length:
T = Over-molded 4-40 thumbscrew
100 = 1.0 meters
B = Discrete 4-40 thumbscrew shell kit
200 = 2.0 meters
TS-2103-03
500 = 5.0 meters
Sheet 2 of 4
3M
3M is a trademark of 3M Company.
Interconnect Solutions
For technical, sales or ordering information call