3M PTFE Film Electrical Tape 60, 61, 62 11/08/19 Article Information Sheet Copyright,2019, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. This Article Information Sheet is provided as a courtesy in response to a customer request. A Safety Data Sheet (SDS) has not been prepared for these product(s) because they are articles. Articles are not subject to the Occupational Safety and Health Administrations Hazard Communication Standard (29 CFR 1910.1200(b)(6)(v)). As defined in this standard: Article means a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during manufacture (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use and (iii) which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a hazardous chemical, and does not pose a physical hazard or health risk to employees. Document Group: 07-9918-9 Version Number: 1.01 Issue Date: 11/08/19 Supercedes Date: 02/05/14 SECTION 1: Identification 1.1. Product identifier 3M PTFE Film Electrical Tape 60, 61, 62 Product Identification Numbers 80-0080-0621-7, 80-0120-3805-7, 80-0180-0222-2, 80-6108-6725-3, 80-6108-7842-5, 80-6108-7926-6, 80-6108-8409-2 7010348235, 7000132176, 7000009018, 7000005803, 7000058471, 7000145529, 7000031592 1.2. Recommended use and restrictions on use Recommended use Electrical 1.3. Suppliers details MANUFACTURER: 3M DIVISION: Electrical Markets Division ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification This product is exempt from hazard classification according to OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 3: Composition/information on ingredients Page 1 of 43M PTFE Film Electrical Tape 60, 61, 62 11/08/19 Ingredient C.A.S. No. % by Wt PTFE Film 9002-84-0 75 - 90 Silicone Adhesive Mixture 10 - 25 SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: No need for first aid is anticipated. Skin Contact: No need for first aid is anticipated. Eye Contact: No need for first aid is anticipated. If Swallowed: No need for first aid is anticipated. SECTION 5: Fire-fighting measures In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Not applicable. 6.2. Environmental precautions Not applicable. 6.3. Methods and material for containment and cleaning up Not applicable. SECTION 7: Handling and storage 7.1. Precautions for safe handling This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical under normal use conditions. 7.2. Conditions for safe storage including any incompatibilities No special storage requirements. SECTION 8: Exposure controls/personal protection This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical under normal use conditions. No engineering controls or personal protective equipment (PPE) are necessary. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Page 2 of 4