Technical Datasheet 3M Tora Series Safety Spectacles Product Description Key Features The 3M Tora Series safety spectacle is comprised of a Optical class 1 lens suitable for prolonged use rimless wrap-around lens and fixed-length temple arm. An Design provides excellent coverage and good field of vision integrated brow-guard is included for added protection. The Offers excellent protection against UV radiation temple tips include holes that allow attachment of a lanyard. Integrated brow bar for added protection Lens coatings provide both scratch resistance and reduced fogging Product Range Lightweight design (24g) 71501-00001M 3M Tora PC Clear AS/AF 71501-00002M 3M Tora PC Bronze AS/AF 71501-00003M 3M Tora PC Amber AS/AF Applications These products can be used in a wide range of applications including: Intended Use Construction These products are intended for protection against high speed Engineering particles at low energy (F) at extreme temperature conditions, -5C and +55C, (T) in accordance with EN166:2001. They also General assembly protect against UV radiation in accordance with EN170:2002, and Inspection work sun glare in accordance with EN172:1994 (bronze lens). Light duty maintenance and repair A number of lens options are available for a variety of different Woodworking applications: Clear Good colour recognition and excellent UV protection Standards and Approval Bronze Protection from sunglare This protective eyewear has been shown to meet the basic Amber Enhanced contrast in low light conditions safety requirements under Article 10 of the European Community Directive 89/686/EEC and is thus CE marked. These products have been examined at the design stage by INSPEC International Ltd., 56 Leslie Hough Way, Salford, Greater Manchester, M6 6AJ, United Kingdom (Notified Body number 0194). These products are tested and CE approved against EN166:2001. Marking Explanation of Marking The products have demonstrated compliance with the Marking Description requirements of EN 166:2001 and associated standards and bear UV protection with good colour recognition. This the following marks: 2C-1.2 product conforms to the requirements of the (EN 170:2002) standard, providing UV protection for the complete Clear lens 2C-1.2 3M 1 FT specified range (210nm 365nm). Sun-glare protection conforming to the 5-2.5 Bronze lens 5-2.5 3M 1 FT requirements of the standard, providing UV (EN 172:1994 protection for the complete specified (as amended)) range (280nm 350nm). Amber lens 2C-1.2 3M 1 FT 1 Optical class Virtua frame 3M Tora EN 166 FT CE Impact protection against high speed particle at F low energy (45m/s) Tested for impact protection at extreme T Materials Listing temperature conditions -5C and +55C Component Material Important Notice Lens Polycarbonate 3M does not accept liability of any kind, be it direct or Temple Arm Polycarbonate consequential (including, but not limited to, loss of profits, business and/or goodwill) arising from reliance upon any information herein provided by 3M. The user is responsible for determining the suitability of the products for their intended Use Limitation use. Nothing in this statement will be deemed to exclude or Never modify or alter this product restrict 3Ms liability for death or personal injury arising from its Do not use this product against hazards other than those negligence. specified in this document. This product is not suitable for grinding or welding In accordance with EN166:2001 safety spectacles cannot be tested and approved for use against liquid droplets. Where liquid protection is specified a suitable product should be considered, for example safety goggles. This product is not designed to be worn over prescription spectacles. Personal Safety Division EMEA Region 3M Centre, Cain Road, Bracknell 15795 Berkshire RG12 8HT 3M is a trademark of 3M company. United Kingdom Please recycle. 3M 2013. Tel: +44 (0) 1344 858000 All rights reserved. www.3M.eu/safety EU Master 01