Specialty Terminals WW 71M-250-32-P, 72M-250-32-P, 73M-250-32-P Male Disconnect, Vinyl Insulated, Butted Seam L Data Sheet Male Tab Maximum Wire Range Width (W ) Barrel Barrel Insulation Product Number(LAWG) x Thickness Length I.D. Diameter 781M-250-32-P232-1 02.905.250 x 0.0305.2 05.06 0.14 742M-250-32-P136-1 02.905.250 x 0.0305.2 00.08 0.17 703M-250-32-P152-1 12.005.250 x 0.0300.2 00.15 0.25 Installation Information WARNING CANADIAN STANDARDS UNDERWRITERS Turn power off before installing or removing terminal. All electrical ASSOCIATION work should be done according to appropriate electrical codes. LABORATORIES STANDARD NO. C22.2 STANDARD NO. UL 310 NO. 153 3M FILE NO. E70512 3M FILE NO. LR22190 UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended Specifications 3M crimp tool: TH-440, TH-450 (scissor style) hand tools, or TR-490 (ratchet style) hand tools. Wire Size: See Table Above Barrel Seam: Butted Max. Voltage Rating: 600 V Building Wire 1000 V Signs or Fixtures (Luminaires) Barrel Crimp (Required) Max. Temperature Rating: 221F (105C) Max. Current: Same as Wire Insulator Material: Vinyl Terminal Material: ETP Copper Plating: Tin Suitable for factory application on steel or brass tabs UL or CSA. Suitable for field application on brass tabs, strain relief required, UL only.Engineering Specification Crimp-Type Male Quick-Slide Connectors shall, The Vinyl Insulated 0.250 Male Disconnect with electrically and mechanically connect permanently to the Insulation Grip shall be tin plated 0.032 thick copper, prestripped end of a stranded copper wire and, have a flat with a 0.250 blade conforming to ANSI/NEMA DC-2 rectangular tongue portion for mating to a Female dimension and a 0.25 long barrel with a molded vinyl Disconnect in a separable, reusable manner, forming a sleeve, color coded, and sized for a specified (AWG) wire Quick Connect Wiring Connection. range (22-18, 16-14, 12-10). The connector line shall offer tongue variations (size Insulated connectors shall be UL Listed and CSA 0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA DC-2) Certified for 600 volts maximum, building wire: 1000 and barrel variations in wire size 22-18 AWG, 16-14 volts maximum, signs and fixtures (luminaires) The AWG, 12-10 AWG and construction of non-insulated, connector shall be temperature rated 221F (105C) vinyl insulated nylon fully insulated, etc. maximum. The Quick-Slide Connectors shall have regulatory agency Quick Slide Connectors shall be suitable for field or coverage (UL Listing, CSA Certification). The tongue factory wiring, with a UL Recognized strain relief shall be marked with the wire range and the required. manufacturers symbol ( ). 3M is a trademark of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.