Scotch-Mount 4430 Double Coated Foam Tape Product Data Sheet Updated : October 1993 Supersedes : 4430 is a white double Product Description coated synthetic foam tape with a high tack acrylic adhesive. This tape has a plain white paper liner. Acrylic 3M ref : Physical Properties Adhesive Type Not for specification purposes Synthetic Foam Core Foam Density 560 kg/m Thickness (ASTM D-3652) 0.8 mm 0.1mm Tape White Paper Release Liner White Tape Colour 12 months from date of despatch by 3M when stored in the Shelf Life original carton at 21C (70F) & 50 % Relative Humidity 20 N/10mm Performance Peel Adhesion to Characteristics Stainless Steel 90 peel room temp, 72 hr dwell, Not for specification purposes jaw speed 300mm/min 1000g 20C Static Shear Strength weight held for 100 hours to stainless steel 500g 70C with sq in (3.23 sq cm) overlap Temperature Performance 70C Continuous 100C Intermittent2 Date : October 1993 4430 Double Coated Foam Tape This product is suitable for Additional Product plasticised PVC BUT IS Information NOT SUITABLE FOR LOW SURFACE ENERGY PLASTICS. 1. Bond strength is surfaces must be clean dry Initial tape application to Application Techniques dependent upon the amount and well unified. A typical surfaces at temperatures of adhesive-to-surface surface cleaning solvent is below 10C (50F) is not contact developed. Firm isopropyl alcohol & water. recommended because the application pressure Use proper safety adhesive becomes too firm develops better adhesive precautions for handling to adhere readily. However contact & thus improves solvents. once properly applied low bond strength. temperature holding is 3. Ideal tape application generally satisfactory. 2. To obtain optimum temperature range is 21C adhesion, the bonding to 38C (70F to 100F). Bonding cable trunking Signing applications - low Applications within cabinets or on performance. furniture. Furniture trim bonding. Point of sale bonding applications using board, Cable clips & air freshener, paper and most plastics. bonding. 3M and Scotch-Mount are trademarks of the 3M company. Values presented have been determined by standard test methods and are average values not to be used for specification purposes. Our recommendations on the use of our products are based on tests believed to be reliable but we would ask that you conduct your own tests to determine their suitability for your applications. This is because 3M cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result of our recommendations. 3M United Kingdom PLC 1996 Specialty Tapes & Adhesives 3M United Kingdom PLC Customer Service : 3M Ireland Customer Service : 3M House, 3M House, Adelphi Centre, 28 Great Jackson Street, Tel 0161 236 8500 Upper Georges Street, Tel (01) 280 3555 Manchester, Fax 0161 237 1105 Dun Laoghaire,Co. Dublin, Fax (01) 280 3509 M15 4PA Ireland