T&B Fittings Industrial Fittings Liquidtight Flexible Nonmetallic Conduit Fittings Specifications Type A Conduit Fittings Application Standard Material T o provide a liquidtight, dustight Body Thermoplastic connection between flexible, nonmetallic Gland Thermoplastic conduit and a box or an enclosure O Ring Neoprene Features Locknut Steel (Case Hardened) S errated design provides high Standard Finish mechanical pullout strength (A) Body, Gland & O Ring As Molded U nique component parts (body/gland) Locknut Electro Zinc design insures positive seal between Range conduit and fitting (B) T apered thread hub and sealing O ring pro- C onduit Size 1/2 in. thru 1-1/4 in. vide a liquidtight/dust tight seal to a box or H ub Size 1/2 in. thru 1-1/4 in. NPT Series 6302 an enclosure (C) Liquidtight Flexible Nonmetallic Conduit Fittings H igh strength, chemical resistant, non-burning, non-dripping thermoplastic construction S mooth insulated body throughout for maxi- mum dielectric strength C aptive O ring and reduced number of parts save installation time (D) Series 6322 Liquidtight Flexible Nonmetallic Conduit Fittings w w w .tnb .c a B103 T&B Fittings Industrial Fittings Liquidtight Flexible Nonmetallic Conduit Fittings Suggested Specifications for Type A Conduit and Fittings T ype A Liquidtight Flexible Nonmetallic Conduit shall be seamless (1) Ferrous metallic fittings shall be electro-zinc plated inside type adequately reinforced with one or more layers of flexible braided outside and equipped with a nylon insulated throat reinforcing cords. Conduit jacket shall be of non-kinking oil resistant/ (2) T hermoplastic fittings shall be of high impact chemical water resistant flame retardant material suitable for ambient environ - resistant, non-burning, non-dripping thermoplastic mental conditions. (3) Fittings shall be provided with a captive, moisture resistant/ W here Type A Flexible Nonmetallic Conduit terminates into a oil resistant synthetic rubber gasket threaded or threadless opening, the conduit shall be cut square, deburred, installed with sufficient slack to reduce effects of vibration and assembled with approved fittings such as Series 6302 or 3720 manufactured by Thomas & Betts. Fittings shall be of malleable iron/ steel/ thermoplastic construction with taper-threaded hub and: Liquidtight Flexible Nonmetallic Conduit (A) Left-Handed Threads A Gland Gland (A & B) Body Body Sealing O Ring Sealing O Ring (D) Locknut Captive Sealing O Ring (C) Taper Threaded Hub w w w .tnb .c a B104