Stay Connected with Heyco Bushings, Grommets, HEYCaps and Plugs Heyco EPDM Snap-In Liquid Tight Bushings Mounting Hole Diameter Range: .492 (12,5 mm) to 1.988 (50,2 mm) Simple to installsnap LTB into MOUNTING CABLE PART NO. DESCRIPTION PART DIMENSIONS HOLE DIAMETER DL H place, cut cable end at a 45 angle, DIAMETER RANGE Black Gray Hole Head Overall Head pierce thin LTB membrane then insert Size Diameter Length Thickness and pull back cable to form a liquid in. mm. in. mm. in. mm. in. mm. in. mm. tight seal. PG Sizes for Panel Thickness from .04 (1,0 mm) to .16 (4,0 mm) Available in Black and Gray color. .519 13,2 .12-.20 3,0-5,0 4014B 4014 LTB 30-50/PG7 PG7 .77 19,5 .53 13,5 .630 16,0 .20-.28 5,0-7,0 4015B 4015 LTB 50-70/PG9 PG9 .81 20,5 .77 19,5 .28 7,0 Provide light strain relief to the cable. .750 19,0 .28-.39 7,0-10,0 4016B 4016 LTB 70-100/PG11 PG11 .98 25,0 .83 21,0 Can be used as a liquid tight plug. .906 23,0 .31-.55 8,0-14,0 4017B 4017 LTB 80-140/PG16 PG16 1.10 28,0 .89 22,5 .26 6,5 Offers protection to IP 67. 1.142 29,0 .55-.79 14,0-20,0 4018B 4018 LTB 140-200/PG21 PG21 1.37 34,7 1.04 26,5 .30 7,5 Ozone and weather resistant. 1.500 38,0 .79-1.02 20,0-26,0 4019B 4019 LTB 200-260/PG29 PG29 1.80 45,7 1.10 28,0 .28 7,0 For outdoor and indoor applications. 1.890 48,0 1.02-1.38 26,0-35,0 4020B 4020 LTB 260-350/PG36 PG36 2.26 57,5 1.44 36,5 .30 7,7 Sizes available to fit cable diameters Metric Sizes for Panel Thickness from 1,3 mm (.05) to 5,1 mm (.20) ranging from .12 (3,0 mm) .492 12,5 .16-.28 4,0-7,0 4007B 4007 LTB 30-50/M12* M12 .79 20,0 .50 12,7 up to 1.38 (35,0 mm). .650 16,5 .20-.35 5,0-9,0 4008B 4008 LTB 50-70/M16 M16 .83 21,0 .71 18,0 .807 20,5 .32-.51 8,0-13,0 4009B 4009 LTB 70-100/M20 M20 1.00 25,5 .79 19,5 .26 6,5 1.004 25,4 .43-.67 11,0-17,0 4010B 4010 LTB 100-140/M25 M25 1.20 30,5 .85 21,5 1.280 32,5 .59-.79 15,0-20,0 4011B 4011 LTB 140-200/M32 M32 1.52 38,5 .98 24,8 1.594 40,5 .75-1.10 19,0-28,0 4012B 4012 LTB 200-260/M40 M40 1.91 48,5 1.18 30,0 .32 8,1 1.988 50,2 1.06-1.38 27,0-35,0 4013B 4013 LTB 260-350/M50 M50 2.38 60,5 1.38 35,0 *Panel thickness from 0,5 mm (.02) to 2,0 mm (.08). L Push Through D Pull Back H 1. A sharpened dowel pin is 2. The dowel pin is inserted 3. Wire is inserted through selectedslightly smaller into the opening on the front the LTB and then pulled back than the wire diameter of the LTB and pushed to create a seal through the membrane Material EPDM o Temperature Range -40F (-40C) to 200 F (93C) Quick IP Rating IP 67 Specs 1-800-526-4182 732-286-1800 (NJ) FAX: 732-244-8843 www.heyco.com 6-18