AMCA62-2R640G-01F-T ABRACON

Surface Mount BRS/WiMAX Antenna (2640MHz) RoHS / RoHS II Compliant Pb AMCA62-2R640G-01F-T 6.0 x 2.0 x 1.0mm Moisture Sensitivity Level (MSL) MSL = 1 FEATURES: APPLICATIONS: 2640MHz, Bandwidth 200MHz Wireless application Broadband Radio Service (BRS) & WiMax bands. Suitable for RoHS compliant reflow User Equipments (UE), e.g. dongles, modems Gain 2.5dBi (Peak) / 1.0dBi (Average) User Equipments applications covering 2640MHz WiMax bands. VSWR <2:1 Alternative to larger PCB solution Small size 6.0 x 2.0 x 1.0mm (0.204 x 0.082 x 0.039inch) Non Ground Mounting type. Power Handling 3W Max Matched to 50 Ohm STANDARD SPECIFICATIONS Maximum Ratings Item Value Operating Temperature Range -40C to + 85C Storage Temperature Range -10C ~ +40 and RH C 70% (Max.) Electrical Characteristics Item Spec Frequency 2640MHz Bandwidth 200MHz Peak Gain 2.6 dBi typ. Average Gain 0.7 dBi ty p VSWR <2:1 Impedance 50 Ohm Power Capability 3W max PART IDENTIFICATION: AMCA62-2R6400G-S1F-T4 Packaging Blank: Bulk or Cut Tape T4 : T/R 4000pcs per reel REVISED: 05.17.2017 5101 Hidden Creek Lane Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 ABRACON IS For terms and conditions of sale visit: ISO9001-2008 www.abracon.com CERTIFIEDSurface Mount WLAN Antenna (2640MHz) RoHS / RoHS II Compliant Pb AMCA62-2R640G-01F-T 6.0 x 2.0 x 1.0mm OUTLINE DIMENSIONS: Recommended Land Pattern Series A B C D E F G H I AMCA62 6.00.2 2.00.2 1.00.2 0.50.2 2.00.2 1.50.2 1.00.2 5.00.2 1.40.2 (Dimensions: mm) REFLOW PROFILE: Preheat condition: 150 ~200 /60~120C sec. Allowed time above 217C: 60~90sec. Max temp: 260C Max time at max temp: 10sec. Solder paste: Sn/3.0Ag/0.5Cu Allowed Reflow time: 2x max [Note: The reflow profile in the above table is only for qualification and is not meant to specify board assembly profiles. Actual board assembly profiles must be based on the customer's specific board design, solder paste and process, and should not exceed the parameters as the Reflow profile shows.] MANUAL SOLDERING Pre-heating Temperature: 120C, 60 C ~ 300 sec . Iron soldering power: Max.30W. Pre-heating: 150 / 60 sec. C. Soldering Tip temperature: 350 Max. C. Soldering time: 3 sec Max. Solder paste: Sn/3.0Ag/0.5Cu. Max 1 times for iron soldering. Soldering Temperature: 340C5C, 5sec max per each terminal. [Note: Take care not to apply the tip of the soldering iron to the terminal electrodes.] REVISED: 05.17.2017 5101 Hidden Creek Lane Spicewood TX 78669 ABRACON IS Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sale visit: ISO9001-2008 www.abracon.com CERTIFIED