ASTMLP Low power, Programmable SMD MEMS Oscillator 2.0 x 1.6 x 0.75mm 2.5 x 2.0 x 0.75mm ASTMLP 3.2 x 2.5 x 0.75mm 5.0 x 3.2 x 0.75mm RoHS/RoHS II compliant Pb ESD Sensitive 7.0 x 5.0 x 0.9mm Moisture Sensitivity Level (MSL) 1 FEATURES: APPLICATIONS: GPON, EPON Industry Standard package sizes: 2.0 x 1.6 x 0.75mm, 2.5 x 2.0 x 0.75mm, Portable devices 3.2 x 2.5 x 0.75mm, 5 x 3.2 x 0.75mm, 7.0 x 5.0 x 0.9mm Consumer electronics Any frequency between 1MHz and 137MHz Network switches, router, servers Supply Voltage options: 3.3V, 3.0V, 2.8V, 2.5V, 1.8V, 2.25V ~ 3.63V Ethernet, USB, SATA, SAS, Firewire Low Current Consumption: 3.5mA typ. ( 20MHz, 1.8V, no load) Harsh environment (vibration, shock-prone and humid) 4.9mA typ. ( 125MHz, 1.8V, no load) Frequency Stability options: 20ppm, 25ppm, 50ppm over -20 to +70C and -40 to +85C Factory programmable drive strength for improved jitter, reduced EMI or higher capacitive output load STANDARD SPECIFICATIONS: All Min and Max limits are specified over temperature and rated operating voltage with 15pF output load unless otherwise stated. Typical values are at 25C and nominal supply voltage. Parameters Min Typ Max Unit Notes 1 110 Output Frequency Range (F) MHz 115 137 See Section 1.1 for Standard Frequencies Standard Frequencies MHz st Inclusive of initial tolerance at 25C, 1 -20 +20 year aging at 25C, and variations over Frequency Stability (F ) -25 +25 ppm stab operating temperature, rated power -50 +50 supply voltage and load (15pF10%) Option E -20 +70 Operating Temperature Range (T ) C use Option L -40 +85 1.62 1.8 1.98 Option 18 2.25 2.5 2.75 Option 25 2.52 2.8 3.08 Option 28 Supply Voltage (V ) V dd 2.7 3.0 3.3 Option 30 Option 33 2.97 3.3 3.63 Option Blank (default) 2.25 3.63 No load, F=20MHz, V =2.8V,3.0V,3.3V dd 3.8 4.5 or 2.25V-3.63V 3.7 4.2 No load, F=20MHz, V =2.5V dd No load, F=20MHz, V =1.8V 3.5 4.1 dd Current Consumption ( I ) mA dd No load, F=125MHz, 6.2 7.5 V =2.8V,3.0V,3.3V or 2.25V-3.63V dd No load, F=125MHz, V =2.5V 5.5 6.4 dd No load, F=125MHz, V =1.8V 4.9 5.6 dd V =2.5V-3.3V, OE=GND, output is in dd 4.2 High-Z state OE Disable Current (I ) mA OD V =1.8V, OE=GND, output is in High-Z dd 4.0 state ST=GND, V =2.8V-3.3V, output is dd 2.6 4.3 weakly pulled down ST=GND, V =2.5V, output is weakly dd Standby Current (I ) 1.4 2.5 A std pulled down ST=GND, V =1.8V, output is weakly dd 0.6 1.3 pulled down Measured from the time V reaches its dd Startup Time (T ) 5 ms start rated minimum value F=110MHz. For other frequencies, 130 T =100ns+3*cycles oe Enable/Disable Time (T ) ns oe F=137MHz. For other frequencies, 122 T =100ns+3*cycles oe Measured from the time ST pin crosses Resume Time ( T ) 5 ms resume 50% threshold 5101 Hidden Creek Ln Spicewood TX 78669 ABRACON IS Phone: 512-371-6159 Fax: 512-351-8858 ISO9001-2015 REVISED: 12.14.2018 LLC For terms and conditions of sales, please visit: CERTIFIED www.abracon.com NRNDASTMLP Low power, Programmable SMD MEMS Oscillator 2.0 x 1.6 x 0.75mm 2.5 x 2.0 x 0.75mm ASTMLP 3.2 x 2.5 x 0.75mm 5.0 x 3.2 x 0.75mm RoHS/RoHS II compliant Pb 7.0 x 5.0 x 0.9mm (Continued) Parameters Min Typ Max Unit Notes Output Type LVCMOS All V options Duty Cycle 45 55 % dd V =2.5V, 2.8V, 3.0V or 3.3V, 20%-80% 1 2 dd Rise/Fall Time ( T /T ) 1.3 2.5 ns V =1.8V, 20%-80% dd r f V =2.25V-3.63V, 20%-80% 2 dd I =-4mA (V =3.0V or 3.3V) OH dd I =-3mA (V =2.8V or 2.5V) Output High Voltage (V ) 90%*V V OH dd OH dd I =-2mA (V =1.8V) OH dd I =4mA (V =3.0V or 3.3V) OL dd I =3mA (V =2.8V or 2.5V) Output Low Voltage (V ) 10%*V V OL dd OL dd I =2mA (V =1.8V) OL dd Input High Voltage(V ) 70%*V V Pin 1 IH dd Input Low Voltage(V ) 30%*V V Pin 1 IL dd Pin 1, OE logic high or logic low, 50 87 150 k ST logic high Input Pull-up Impedance ( Z ) in 2 M Pin 1, ST logic low F=75MHz, V =2.5V, 2.8V, 3.0V or dd 1.8 3 3.3V F=75MHz, V =1.8V 1.8 3 dd RMS Period Jitter ( T ) ps jitt F=125MHz, V =2.5V, 2.8V, 3.0V or dd 1.9 3 3.3V F=125MHz, V =1.8V 1.8 4 dd F=75MHz, 125MHz, V =2.5V, 2.8V, dd 12 25 3.0V or 3.3V Peak-to-peak Period Jitter (T ) ps pk F=75MHz, 125MHz, V =1.8V 14 30 dd F=75MHz, integration 0.5 0.9 bandwidth=900kHz to 7.5MHz RMS Phase Jitter (random) ( T ) ps phj F=75MHz, integration bandwidth=12kHz 1.3 2 to 20MHz Standard Frequency (MHz) Standard Frequency (MHz) 3.57 4 4.096 6 7.3728 8.192 10 12 14 18.432 19.2 20 24 24.576 25 25.000625 26 27 28.6363 30 31.25 32.768 33 33.3 33.33 33.333 33.3333 33.3333 37.5 38 38.4 40 40.5 48 50 54 60 62.5 65 66 66.66 66.66 66.666 66.6666 66.66666 72 74.175824 74.176 74.25 75 77.76 5101 Hidden Creek Ln Spicewood TX 78669 ABRACON IS Phone: 512-371-6159 Fax: 512-351-8858 ISO9001-2015 REVISED: 12.14.2018 LLC For terms and conditions of sales, please visit: CERTIFIED www.abracon.com NRND