Product Information


Product Image X-ON

AC/DC LED Power Supply 60W Single
Manufacturer: AC Electronics

Price (USD)

1: USD 50.5377 ea
Line Total: USD 50.5377

0 - Global Stock
MOQ: 1 Multiples:1
Pack Size :   1
Availability Price Quantity
0 - Global Stock

Ships to you between Fri. 07 Apr to Thu. 13 Apr

MOQ : 1
Multiples : 1

Stock Image

AC Electronics

1 : USD 50.5377
10 : USD 48.2074

AC Electronics
Product Category
LED Power Supplies
1 Icon ROHS
Ac Electronics
Show Stocked Products With Similar Attributes. LoadingGif
Image Description
Image Description
Stock Image ELN-30-15P

LED Power Supplies
Stock : 1

Stock Image LDD-300LS

LED Power Supplies 9-32V 2-28Vout 300mA LED Driver SMT style
Stock : 1

Stock Image APV-35-36

LED Power Supplies 36W 36V 1A CV LED PS
Stock : 1

Stock Image PLM-12E-350

LED Power Supplies 12.6W 22-36V 0.35A 180-295VAC CC W/PFC
Stock : 1

Stock Image MDU-9SC3-570

- Const Curr - 12W - Fixed: 32 Vdc @ 700mA - Dim: No --
Stock : 1

Stock Image PLM-40-700

LED Power Supplies 38.5W 29-57V 700mA 110-295Vin CC LED PS
Stock : 1

Stock Image RACT12-350

LED Power Supplies 12W 198-264Vin 18-35Vout 350mA
Stock : 1

Hot Stock Image LDD-1400H-DA

LED Power Supplies 6-50Vin 3-45Vout 1400mA CC w/DALI pin
Stock : 1

Stock Image LDD-350H-DA

LED Power Supplies 6-50Vin 3-45Vout 350mA CC w/DALI pin
Stock : 1

Stock Image LC 8/180/42 FIXC PC SR SNC2

Power supply: switched-mode; LED; 8W; 27÷42VDC; 180mA; 198÷264VAC
Stock : 1

Constant Voltage LED Driver Model Number AC-A60VD24H2.5 Input Voltage: 120-277V Input Frequency: 50/60Hz Dimming Side Mount/Leads ELECTRICAL SPECIFICATIONS: Minimum Minimum Output Input Max. THD Output Output T case Efcfi iency Dimming Dimming IP PF Starting Power Current (full load) Voltage Current Maximum Up To Protocol Range Rating (full load) Temp. 0.6A 120V 0.25 8.4 to 60W >0.95 <10% 24V 5% 90 C -40 C 86.6% 0 to 10V IP66 0.26A 277V to 2.5A 100% WIRING: PHYSICAL: For non-dimming applications, separately cap-off both the purple and gray wires. Hot Spot Dimensions Length 9.5 Width 1.7 Height 1.14 Mounting Length 8.9 Mounting Hole Distance 1.0 Lead Lengths Mounting Hole Diameter .20 Black 5.9 Blue 5.9 Purple 9.8 Weight 1.32 lbs. White 5.9 Red 5.9 Gray 9.8 Case Qty. 30 pcs. SAFETY: UL and cUL Recognized Open/Short Circuit Protection Warranty: 5 yrs based on max case temp of UL1310 Class 2 LED driver has a life expectancy of <75C 3 yrs based on max case temp of 90C* UL Outdoor Type 1 50,000 hours at Tcase of 75C Input/Output Isolation Class A sound rating LED driver has a life expectancy of FCC Title 47 CFR Part 15 Overload Protection 100,000 hours at Tcase of 65C Surge Protection (2 KV) INSTALLATION: LED drivers shall be installed inside electrical enclosures Max Remote installation distance is 18 ft 18 AWG 600V/105C tinned strand copper lead-wires are required for installation LED driver cases should be grounded *AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75C 3 years from date of manufacture when operated at a max case temp of up to 90C when properly installed and under normal conditions of use. See for complete warranty policy. 3401 Avenue D, Arlington, TX 76011 800-375-6355 RoHS Data is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary COMPLIANT depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted. LEAD -FREE 2017 Revised 02/27/2017X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for LED Power Supplies category: Click to view products by AC Electronics manufacturer: Other Similar products are found below : ESS015W-1000-12 EUC-075S105DT PDA-WIFI PIFC-K250F PITB-K222A ALD-514012PJ134 LB240S24KH LMH020-SPLC-0000- 0000001 79534 79535 EUG-200S210DT ESS030W-1050-21 ESS030W-0900-32 BPOXL 4-12-035 SLM160W-3.9-40-ZA ESS010W-0180- 42 ESS010W-0350-24 ESS010W-0200-42 PDA080B-1A0G PDA150B-S1A5G ZPS-20 SLM140W-1.05-130-ZA ESS040W-1400-27 ESS015W-0700-18 ESS010E-0250-42 EDC-100S105SV-0007 79278 EUD-150S350DVA LWA320-C420-ARK-B 50304 HVG-320-36AB HVG-320-54AB OT FIT 50/220-240/300 D L OT FIT 35/220-240/350 D CS L OT FIT 65/220-240/350 D CS L ELEMENT 30/220-240/700 S LC 75W 100-400MA 1-10V LP EXC LCA 35W 150-700MA ONE4ALL LP PRE LCA 50W 100-400MA ONE4ALL LP PRE LCA 50W 350- 1050MA ONE4ALL LP PRE LCA 50W 350-1050MA 2XCH LP PRE LCI 150/325-1050/300 O4A SL PRE LCA 75W 100-400MA ONE4ALL LP PRE LCA 45W 500-1400MA ONE4ALL SC PRE LC 50W 100-400MA FLEXC LP EXC LCA 75W 350-1050MA ONE4ALL LP PRE LC 50W 350-1050MA FLEXC LP EXC LC 75W 350-1050MA FLEXC LP EXC LCA 75W 900-1800MA ONE4ALL LP PRE LCA 100W 250-700MA ONE4ALL LP PRE

Tariff Desc

8504.40.90 Light-emitting diode (LED) Drivers:
71 Having a power handling capacity not exceeding 10W
72 Having a power handling capacity exceeding 10W but not exceeding 25W
73 Having a power handling capacity exceeding 25W
78 Electric current rectifying assemblies
83 Other

8504.40.90 POWER SUPPLIES having BOTH
(a) input voltages of 176V-246VAC, 47Hz-63Hz single phase OR 200V-230VAC, 50Hz-60Hz single phase
(b) multiple DC output voltages from minus 200 V to positive 200V

(a) input voltage NOT less than 10V and NOT greater than 252V
(b) output voltage NOT less than 2V and NOT greater than 252V
(c) wattage NOT less than 40 W and NOT greater than 160W
(d) output current NOT greater than 17A

8504.50.10 81
(a) designed for use with equipment of 8471
(b) for telecommunication apparatus of 8517 Free

8504.40.90 POWER SUPPLY UNITS, DC AND/OR AC output, complying with AS/NZS 60950 & AS/NZS CISPR 22, having ALL of:
(a) voltage NOT less than 2.5 V and NOT greater than 55V
(b) wattage NOT less than 0.02 W and NOT greater than 105W
(c) current output NOT less than 0.01 amp and NOT greater than 2.5amp

8504.40.90 POWER SUPPLY MODULES having ALL of the following:
(a) input power at EITHER of the following
(i) 120VAC/240VAC
(ii) 24VDC /48VDC
(b) output power at EITHER of the following
(i) 5VDC, +15VDC, -15VDC, and 24VDC field I/O
(ii) 24VDC field I/O only
(c) circuitry monitors
(d) output adjusters

8504.40.90 POWER SUPPLIES DC having BOTH:
(a) variable voltage NOT exceeding 30V
(b) maximum current output NOT exceeding 25amps

8504.40.30 Static converters
(a) separately housed units, designed to be housed in the same cabinet as the central processing unit of equipment of 8471
(b) for telecommunication apparatus of 8517
60 Electric current rectifying assemblies Free
63 Other Free