SL261

AC/DC Current Probe Model SL261 The Model SL261 is designed for AC/DC an excellent companion to DMMs, Features current measurement capabilities using recorders and loggers, oscilloscopes Low AC and DC measurements Hall effect technology. It measures and waveform displaying instru- from 100 mA to over 100A. ments. Low phase shift also insures 100mA to 100Aca /cd peak reliable power and power quality The screw driver shape, with its Unique design for probing in measurements. narrow elongated prod, was chosen crowded wiring in industrial and to permit probing in crowded cable The Model SL261 is designed for automotive environments bundles, or measuring in tight areas current measuring and displaying on Hall effect sensor technology such as on circuit boards, motor oscillo scopes. AC + DC output signals controllers and automotive circuitry. proportional to the total current are Use with DMMs, voltmeters The electronics and batteries are provided for True RMS measurements. and other voltage measuring self- contained in the handles. It is instruments Applications Circuit board testing Motor controllers Automotive circuitry AC/DC Current Probe Model SL261 (pdf) 02/10 Rev03 Technical Assistance (800) 343-1391 www.aemc.com 1 of 4Specifications Model Sl261 ElEctrical Nominal range 10A & 100A peak Measurement range 100mA to 100A peak transformation ratio Voltage output Output Signal 10A: 100mV/A 100A: 10mV/A accuracy (100mV/A Range) 50mA to 10A Peak 3% of Reading 50mA 500mA to 40A Peak 4% of Reading 50mA 40A to 100A Peak 15% max 100A Phase Shift (10mV/A Range) DC to 65Hz 1.5 Overload Red LED indicates input greater than the selected range Frequency range DC to 100kHz (-3dB with current derating) load impedance >1M/100pF Working/common 600Vrms Mode Voltage Output termination 6.5 ft coaxial cable MEchaNical Operating temperature 32 to 122F (0 to 50C) Storage temperature -22 to 176F (-30 to 80C) Operating relative 10 to 30C: 85 5% RH (without condensation) humidity 40 to 50C: 45 5% RH (without condensation) Maximum conductor Size 0.46 (11.8mm) Dimensions 9.09 x 1.42 x 2.64 (231 x 36 x 67mm) Weight 11.6 oz (330g) with battery Polycarbonate Material Handle: Lexan 920A, UL94 V2 SaFEty Electrical EN 61010-2-32 cE Mark Yes Note: Reference conditions: Model SL261: 23C 5K, 20 to 75% RH, DC to 1kHz, probe zeroed, 1 minute warm-up, battery at 9V 0.1V, external magnetic field <40A/m, no DC component, no external current carrying conductor, 1M/100pF load, conductor centered. AC/DC Current Probe Model SL261 (pdf) 02/10 Rev03 Technical Assistance (800) 343-1391 www.aemc.com 2 of 4