1N4099UR-11N4135UR-1
WWW.Microsemi .COM
1N4614UR-11N4627UR-1,e3
IN4099UR-1 thru 1N4135UR-1
(or MLL4099-1 thru MLL4135-1)
and
1N4614UR-1 thru 1N4627UR-1
SCOTTSDALE DIVISION
(or MLL4614-1 thru MLL4627-1)
METALLURGICALLY BONDED GLASS
SURFACE MOUNT 0.5 WATT ZENERS
DESCRIPTION APPEARANCE
The 1N4099UR-1 thru 1N4135UR-1 and 1N4614UR-1 thru 1N4627UR-1
series of 0.5 watt glass surface mount DO-213AA Zener voltage regulators
provides a selection from 1.8 to 100 volts in standard 5% tolerances as well
as tighter tolerances identified by different suffix letters on the part number.
These have an internal-metallurgical-bond option as identified with the -1
suffix. This type of internally bonded Zener package construction is also
available in JAN, JANTX, and JANTXV military qualifications. Microsemi
also offers numerous other Zener products to meet higher and lower power
DO-213AA
applications.
IMPORTANT: For the most current data, consult MICROSEMIs website: 1N4099UR-11N4135UR-1
WWW.Microsemi .COM
1N4614UR-11N4627UR-1,e3
IN4099UR-1 thru 1N4135UR-1
(or MLL4099-1 thru MLL4135-1)
and
1N4614UR-1 thru 1N4627UR-1
SCOTTSDALE DIVISION
(or MLL4614-1 thru MLL4627-1)
o
*ELECTRICAL CHARACTERISTICS @ 25 C
NOMINAL ZENER MAXIMUM MAXIMUM MAXIMUM MAXIMUM TYPICAL
ZENER TEST ZENER REVERSE NOISE ZENER TEMP.COEFF.
MICROSEMI
VOLTAGE CURRENT IMPEDANCE CURRENT DENSITY CURRENT OF ZENER
INDUSTRY PART
VOLTAGE
V @ I I Z I @ V N @ I I
Z ZT ZT ZT R R D ZT ZM
PART NUMBER NUMBER
(NOTE 2) (Note 3)
VZ
o
(NOTE 1) (NOTE 1) VOLTS OHMS Volts mA %/ C
A A V/Hz
1N4614UR-1 MLL4614-1 1.8 250 1200 3.5 1.0 1 120 -0.075
1N4615UR-1 MLL4615-1 2.0 250 1250 2.5 1.0 1 110 -0.075
1N4616UR-1 MLL4616-1 2.2 250 1300 2.0 1.0 1 100 -0.075
1N4617UR-1 MLL4617-1 2.4 250 1400 1.0 1.0 1 95 -0.075
1N4618UR-1 MLL4618-1 2.7 250 1500 0.5 1.0 1 90 -0.075
1N4619UR-1 MLL4619-1 3.0 250 1600 0.4 1.0 1 87 -0.075
1N4620UR-1 MLL4620-1 3.3 250 1650 3.5 1.5 1 85 -0.075
1N4621UR-1 MLL4621-1 3.6 250 1700 3.5 2.0 1 83 -0.065
1N4622UR-1 MLL4622-1 3.9 250 1650 2.5 2.0 1 80 -0.060
1N4623UR-1 MLL4623-1 4.3 250 1600 2.0 2.0 1 77 -0.050
1N4624UR-1 MLL4624-1 4.7 250 1550 5.0 3.0 1 75 -0.040,+0.020
1N4625UR-1 MLL4625-1 5.1 250 1500 5.0 3.0 2 70 -0.045,+0.030
1N4626UR-1 MLL4626-1 5.6 250 1400 5.0 4.0 4 65 -0.020,+0.040
1N4627UR-1 MLL4627-1 6.2 250 1200 5.0 5.0 5 61 -0.010,+0.050
1N4099UR-1 MLL4099-1 6.8 250 200 1.0 5.17 40 56 0.040
1N4100UR-1 MLL4100-1 7.5 250 200 1.0 5.70 40 51 0.045
1N4101UR-1 MLL4101-1 8.2 250 200 0.5 6.24 40 46 0.048
1N4102UR-1 MLL4102-1 8.7 250 200 0.5 6.61 40 44 0.049
1N4103UR-1 MLL4103-1 9.1 250 200 0.5 6.92 40 42 0.050
1N4104UR-1 MLL4104-1 10 250 200 0.5 7.60 40 38 0.055
1N4105UR-1 MLL4105-1 11 250 200 .05 8.44 40 35 0.060
1N4106UR-1 MLL4106-1 12 250 200 .05 9.12 40 32 0.065
1N4107UR-1 MLL4107-1 13 250 200 .05 9.87 40 29 0.065
1N4108UR-1 MLL4108-1 14 250 200 .05 10.65 40 27 0.070
1N4109UR-1 MLL4109-1 15 250 100 .05 11.40 40 25 0.070
1N4110UR-1 MLL4110-1 16 250 100 .05 12.15 40 24 0.070
1N4111UR-1 MLL4111-1 17 250 100 .05 12.92 40 22 0.075
1N4112UR-1 MLL4112-1 18 250 100 .05 13.67 40 21 0.075
1N4113UR-1 MLL4113-1 19 250 150 .05 14.44 40 20 0.075
1N4114UR-1 MLL4114-1 20 250 150 .01 15.20 40 19 0.075
1N4115UR-1 MLL4115-1 22 250 150 .01 16.72 40 17 0.080
1N4116UR-1 MLL4116-1 24 250 150 .01 18.25 40 16 0.080
1N4117UR-1 MLL4117-1 25 250 150 .01 1900 40 15 0.080
1N4118UR-1 MLL4118-1 27 250 150 .01 20.45 40 14 0.085
1N4119UR-1 MLL4119-1 28 250 200 .01 21.28 40 14 0.085
1N4120UR-1 MLL4120-1 30 250 200 .01 22.80 40 13 0.085
1N4121UR-1 MLL4121-1 33 250 200 .01 25.08 40 12 0.085
1N4122UR-1 MLL4122-1 36 250 200 .01 27.38 40 11 0.090
1N4123UR-1 MLL4123-1 39 250 200 .01 29.65 40 9.8 0.090
1N4124UR-1 MLL4124-1 43 250 250 .01 32.65 40 8.9 0.090
1N4125UR-1 MLL4125-1 47 250 250 .01 35.75 40 8.1 0.090
1N4126UR-1 MLL4126-1 51 250 300 .01 38.76 40 7.5 0.090
1N4127UR-1 MLL4127-1 56 250 300 .01 42.60 40 6.7 0.090
1N4128UR-1 MLL4128-1 60 250 400 .01 45.60 40 6.4 0.090
1N4129UR-1 MLL4129-1 62 250 500 .01 47.10 40 6.1 0.090
1N4130UR-1 MLL4130-1 68 250 700 .01 51.68 40 5.6 0.095
1N4131UR-1 MLL4131-1 75 250 700 .01 57.00 40 5.1 0.095
1N4132UR-1 MLL4132-1 82 250 800 .01 62.32 40 4.6 0.095
1N4133UR-1 MLL4133-1 87 250 1000 .01 66.12 40 4.4 0.095
1N4134UR-1 MLL4134-1 91 250 1200 .01 69.16 40 4.2 0.095
1N4135UR-1 MLL4135-1 100 250 1500 .01 76.00 40 3.8 0.095
NOTE 1: These may be ordered as either 1N4614UR-1 thru 1N4627UR-1 and 1N4099UR-1 thru 1N4135UR-1 or MLL4614-1 thru MLL4627-1 and
MLL4099-1 thru MLL4135-1. For military types, add the JAN, JANTX, JANTXV prefix for required screening to the industry part number.
NOTE 2: The JEDEC type numbers shown above have a standard tolerance of +/-5% on the nominal Zener voltage. Tighter tolerances are also
available with C or D suffix for 2% or 1% tolerance respectively, e.g. 1N4105CUR-1 for 2%. V is measured with the diode in
Z
o
thermal equilibrium (still air) at 25 C for end-cap terminations.
NOTE 3: Zener impedance is derived by superimposing on I a 60 Hz rms ac current at 10% of I . See MicroNote 202 for Z variation with I .
ZT ZT ZT Z
Copyright 2006
Microsemi
Page 2
3-30-06 REV D
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503