Product Information

62NC257-2-J5

62NC257-2-J5 electronic component of AIM

Datasheet
SOLDER PASTE, SN62, 500G; Flux Type:No Clean; Solder Alloy:-; Melting Temperature:183C; Weight - Metric:500g; Weight - Imperial:1.102lb; Product Range:-; Material Composition:Sn62; Weight:500g

Manufacturer: AIM
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 103.4123 ea
Line Total: USD 103.41

0 - Global Stock
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0 - Global Stock


Ships to you between Mon. 06 May to Fri. 10 May

MOQ : 1
Multiples : 1
1 : USD 126.6309

     
Manufacturer
Product Category
Brand
Flux Type
Melting Temperature
Weight - Metric
Weight - Imperial
Material Composition
Weight
LoadingGif

Notes:- Show Stocked Products With Similar Attributes.
Image Description
13427 electronic component of AIM 13427

Solder Sn63/Pb37 RMA 3% .015 DIA 1/2 lb.
Stock : 21

13562 electronic component of AIM 13562

Solder Sn63/Pb37 RMA 3% .025 DIA 1 lb.
Stock : 47

13560 electronic component of AIM 13560

Solder Sn63/Pb37 RMA 3% .020 DIA 1 lb.
Stock : 3

14600 electronic component of AIM 14600

Solder SAC305 RA 2% .050 DIA 1 lb.
Stock : 24

NC254AXS10-PT electronic component of AIM NC254AXS10-PT

FLUX GEL, SYRINGE, NO CLEAN, 10CC
Stock : 0

SAC305NC257-2-J250 electronic component of AIM SAC305NC257-2-J250

SOLDER PASTE, SAC305
Stock : 0

15064 electronic component of AIM 15064

Solder SN100C 2.5% FLUX .040 DIA 1lb SPOOL
Stock : 12

14317 electronic component of AIM 14317

Solder SAC305 RA 2% .062 DIA 1 lb.
Stock : 22

SAC305GLOWCORE-2.5%-.025-1 electronic component of AIM SAC305GLOWCORE-2.5%-.025-1

SAC305GLOWCORE2DDOT5DDOT0251 aim
Stock : 13

SN63209AXT2%-.062-1 electronic component of AIM SN63209AXT2%-.062-1

SN63209AXT2DDOT0621 aim
Stock : 1

Image Description
8001017 electronic component of Fisnar 8001017

Syringe adapter; 30/55ml; Colour: green
Stock : 1

SMD291SNL15T4 electronic component of Chip Quik SMD291SNL15T4

Lead Free No-Clean Solder Paste, Two Part Mix Sn96.5Ag3Cu0.5 (96.5/3/0.5) Jar, 0.53 oz (15g)
Stock : 1

D99182 electronic component of Henkel D99182

SOLDER WIRE, LEAD FREE, 18SWG, 250G
Stock : 0

4897-227G electronic component of MG Chemicals 4897-227G

Solder 18AWG .050IN DIA 1/2lb. SPOOL
Stock : 1

4888-454G electronic component of MG Chemicals 4888-454G

Solder 16AWG .062IN DIA 1LB. SPOOL
Stock : 5

HS10 2510 1,0MM 500G electronic component of Stannol HS10 2510 1,0MM 500G

SOLDER WIRE, 362FLUX, 1.0MM, 500G
Stock : 0

WPT17 electronic component of Apex Tool Group WPT17

Soldering Iron Tip - Round - Bent - 2 mm
Stock : 1

WS6016 electronic component of Apex Tool Group WS6016

Solder - Spool -60/40 - .062 DIA - 1LB
Stock : 1

41-096-0201N electronic component of Eurostat 41-096-0201N

Tool: cleaning sticks; L:68mm; Length of cleaning swab:11mm
Stock : 12

83-7145-0415 electronic component of Kester 83-7145-0415

Leaded / Lead Free:Leaded
Stock : 0

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II SAFETY DATA SHEET NC 257-2 Sn-Pb 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Identification of the substance or preparation Product name : NC 257-2 Sn-Pb Product type : Paste. Product description : Not available. Use of the substance/preparation Sector of Use Chemical Product Process Category Article Category Environmental Category Release Category None identified. Company/undertaking identification Manufacturer : AIM 9100 Henri Bourassa East Montreal, QC H1E 2S4 (514) 494-2000 INFOTRAC North America: (800) 535-5053 International: (352) 323-3500 E-mail / Contact AIM : safetydata aimsolder.com 2. HAZARDS IDENTIFICATION Europe The product is classified as dangerous according to Directive 1999/45/EC and its amendments. Classification : Xn R20/22 Xi R36/38 R43 Human health hazards : Harmful by inhalation and if swallowed. Irritating to eyes and skin. May cause sensitization by skin contact. Danger of cumulative effects. See section 11 for more detailed information on health effects and symptoms. 3. COMPOSITION/INFORMATION ON INGREDIENTS Substance/preparation : Preparation Ingredient name CAS % Number Classification number Europe Tin 7440-31-5 40 - 60 231-141-8 Xi Lead 7439-92-1 30 - 40 231-100-4 Xn, N Hydrogenated rosin 65997-06-0 1.5 - 5 266-041-3 Xi See section 16 for the full text of the R-phrases declared above There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section. 1 Substance classified with a health or environmental hazard 2 Substance with a workplace exposure limit 3 PBT-substance 4 vPvB-substance Occupational exposure limits, if available, are listed in section 8. Date of issue/Date of revision : 1/15/2010. 1/8NC 257-2 Sn-Pb 4. FIRST AID MEASURES First aid measures Inhalation : Move exposed person to fresh air. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. Ingestion : Wash out mouth with water. Remove dentures if any. Move exposed person to fresh air. Keep person warm and at rest. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. Skin contact : Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. Continue to rinse for at least 10 minutes. Get medical attention. In the event of any complaints or symptoms, avoid further exposure. Wash clothing before reuse. Clean shoes thoroughly before reuse. Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention. Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. Notes to physician : No specific treatment. Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled. See section 11 for more detailed information on health effects and symptoms. 5. FIRE-FIGHTING MEASURES Extinguishing media Suitable : Use an extinguishing agent suitable for the surrounding fire. Not suitable : None known. Special exposure hazards : No specific fire or explosion hazard. Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. This material is very toxic to aquatic organisms. Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain. Hazardous thermal : Decomposition products may include the following materials: decomposition products carbon dioxide carbon monoxide metal oxide/oxides Special protective : Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure equipment for fire-fighters mode. 6. ACCIDENTAL RELEASE MEASURES Personal precautions : No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment (see section 8). Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to the environment if released in large quantities. Date of issue/Date of revision : 1/15/2010. 2/8

Tariff Desc

8311.30.00 -Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame
AIM
AIM INC.
AIM Products

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON ELECTRONICS
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted