Click on Series name for product info on aimtec.com
Series AM2GH-Z
2 Watt | DC-DC Converter
FEATURES:
SIP8 Package Ultra-Wide Input Range 4:1
Low Ripple and Noise 1600 VDC I/O Isolation
Continuous Short Circuit Protection Efficiency up to 79%
-40C to +85C Operating Temperature Range Remote ON/OFF Control
Models
Single output
Output Maximum Input Current
Input Output Current Efficiency
Model Voltage Capacitive Full Load | No
Voltage (V) Max (mA) (%)
(V) Load (F) Load (mA)
AM2GH-1203SZ 4.5-18 3.3 500 1000 196 40 70
AM2GH-1205SZ 4.5-18 5 400 1000 225 40 74
AM2GH-1212SZ 4.5-18 12 167 220 213 40 78
AM2GH-1215SZ 4.5-18 15 133 100 213 40 78
AM2GH-2403SZ 9-36 3.3 500 1000 96 25 71
AM2GH-2405SZ 9-36 5 400 1000 106 20 78
AM2GH-2412SZ 9-36 12 167 220 105 30 79
AM2GH-2415SZ 9-36 15 133 100 105 30 79
AM2GH-4803SZ 18-75 3.3 500 1000 47 10 72
AM2GH-4805SZ 18-75 5 400 1000 55 15 75
AM2GH-4812SZ 18-75 12 167 220 55 15 75
AM2GH-4815SZ 18-75 15 133 100 54 15 76
Models
Dual output
Output Maximum Input Current
Input Output Current Efficiency
Model Voltage Capacitive Full Load | No
Voltage (V) Max (mA) (%)
(V) Load (F) Load (mA)
AM2GH-1205DZ 4.5-18 5 200 470 219 30 77
AM2GH-1212DZ 4.5-18 12 83 100 213 30 78
AM2GH-1215DZ 4.5-18 15 66 47 216 40 77
AM2GH-2405DZ 9-36 5 200 470 111 30 75
AM2GH-2412DZ 9-36 12 83 100 108 30 77
AM2GH-2415DZ 9-36 15 66 47 106 30 78
AM2GH-4805DZ 18-75 5 200 470 56 15 74
AM2GH-4812DZ 18-75 12 83 100 56 15 74
AM2GH-4815DZ 18-75 15 66 47 55 15 75
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Input Specifications
Parameters Nominal Typical Maximum Units
12 4.5-18
Voltage range 24 9-36 VDC
48 18-75
Filter Capacitor
Start up time 30 ms
12 25
Absolute Maximum Rating 24 50 VDC
48 100
Peak Input Voltage time 100 ms
On/Off control ON: 0 to 0.6VDC (or open) ; OFF:2.7 to 15.0VDC, OFF idle current: 2-4mA
No Load Input Current 40 mA
Input reflected current 20 mA
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832)
F 051e R12.E 1 of 6 North America only
Series AM2GH-Z
2 Watt | DC-DC Converter
Isolation Specifications
Parameters Conditions Typical Rated Units
Tested I/O voltage 60 sec 1600 VDC
Resistance >1000 MOhm
Capacitance 200 pF
Output Specifications
Parameters Conditions Typical Maximum Units
Voltage accuracy 1 %
25% load on one output - 100% load
Cross Regulation (Dual Output Models) 5 %
on second load
Short Circuit protection Continuous
Short circuit restart Auto-Recovery
Line voltage regulation 0.2 %
Load voltage regulation From 0% to 100% load 1 %
o
Temperature coefficient 0.02 %/ C
Ripple & Noise 20MHz Bandwidth 30 mV p-p
General Specifications
Parameters Conditions Typical Maximum Units
Switching frequency 100% load 100 KHz
o
Operating temperature -40 to 85 C
o
Storage temperature -40 to +125 C
o
Maximum case temperature 100 C
o
Derating Above 71C 5 %/ C
Cooling Free Air Convection
Humidity 95 % RH
Case material Non conductive black plastic
Potting Material Silicon (UL94V-0 rated)
Weight 4.5 g
Dimensions (L x W x H) 0.86 x 0.36 x 0.44 inches 21.85 x 9.20 x 11.10 mm
MTBF >1,700,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25C)hours
o
Maximum soldering temperature 1.5mm from case for 10 second 260 C
Transient recovery time 250 uS
Transient recovery deviation 3 %
Safety Specifications
Parameter
Agency Approvals CE
EN55032 , Class A
EN55024:1998 + A1:2001 + A2:2003
IEC61000-4-2:1995 + A1:1998 + A2:2000, Perf. Criteria B
IEC61000-4-3:2006, Perf. Criteria A
IEC61000-4-4:2004, Perf. Criteria B (external 220uF/100V cap required)
Standards
IEC61000-4-5:2005, Perf. Criteria B (external 220uF/100V cap required)
IEC61000-4-6:2007, Perf. Criteria A
IEC61000-4-8, Perf:1993 + A1:2000, Criteria A
NOTE: Also designed to meet IEC 60950-1:2001
www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832)
F 051e R12.E 2 of 6 North America only