AM6Q-2405SZ

Click on Series name for product info on aimtec.com Series AM6Q-Z 6 Watt DC-DC Converter FEATURES: RoHS Compliant Operating Temperature -40C to 85C Wide 2:1 input range Input / Output Isolation of 500VAC High Efficiency up to 86% No Tantalum capacitors used inside Continuous short circuit Over voltage protection Models Single output Output Max Input Voltage Output Current Isolation Efficiency Model Voltage Capacitive (V) max (mA) (VAC) (%) (V) Load(uF) AM6Q-0503SZ 4.5-9 3.3 1000 500 1000 73 AM6Q-0505SZ 4.5-9 5 1000 500 1000 76 AM6Q-0512SZ 4.5-9 12 500 500 500 79 AM6Q-0515SZ 4.5-9 15 400 500 400 79 AM6Q-1203SZ 9-18 3.3 1000 500 1000 76 AM6Q-1205SZ 9-18 5 1200 500 1200 81 AM6Q-1212SZ 9-18 12 500 500 500 85 AM6Q-1215SZ 9-18 15 400 500 400 85 AM6Q-2403SZ 18-36 3.3 1200 500 1200 73 AM6Q-2405SZ 18-36 5 1200 500 1200 80 AM6Q-2412SZ 18-36 12 500 500 500 84 AM6Q-2415SZ 18-36 15 400 500 400 86 AM6Q-4803SZ 36-75 3.3 1200 500 1200 74 AM6Q-4805SZ 36-75 5 1200 500 1200 80 AM6Q-4812SZ 36-75 12 500 500 500 84 AM6Q-4815SZ 36-75 15 400 500 400 85 Models Dual output Output Max Input Voltage Output Current Isolation Efficiency Model Voltage Capacitive (V) max (mA) (VAC) (%) (V) Load(uF) AM6Q-0512DZ 4.5-9 12 250 500 250 82 AM6Q-0515DZ 4.5-9 15 200 500 200 82 AM6Q-1212DZ 9-18 12 250 500 250 88 AM6Q-1215DZ 9-18 15 200 500 200 88 AM6Q-2412DZ 18-36 12 250 500 250 88 AM6Q-2415DZ 18-36 15 200 500 200 88 AM6Q-4812DZ 36-75 12 250 500 250 87 AM6Q-4815DZ 36-75 15 200 500 200 88 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Nominal Typical Maximum Units 5 4.5-9 12 9-18 Voltage range VDC 24 18-36 48 36-75 Filter (Pi) Network Start up time 20 ms No Load Input Current 45 mA Input reflected current 20 mA www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C 1 of 3 North America only Series AM6Q-Z 6 Watt DC-DC Converter Isolation Specifications Parameters Conditions Typical Maximum Units Tested I/O voltage 3sec 500 VAC Resistance 50 MOhm Capacitance 500 pF Output Specifications Parameters Conditions Typical Maximum Units Voltage accuracy 1 % 25% load on one output Cross Regulation (Dual Output Models) 5 % 100% load on the other output 5 6.2 12 15 V Over voltage protection Zener Diode Clamp 15 18 12 15 15 18 Over Current Protection FL 185 % Short Circuit protection Continuous Short circuit restart Auto Recovery Line voltage regulation LL-HL 0.5 % of Vin Load voltage regulation Load:0-100% unbalanced 1 % o Temperature coefficient 0.02 %/ C Ripple & Noise 20MHz Bandwidth 75 mV p-p Minimum Load Current 0 % of Max General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 330 KHz o Operating temperature Derating above 60C -40 to +85 C o Storage temperature -40 to +125 C o Maximum case temperature 100 C Cooling Free Air Convection Humidity 95 % RH Case material Nickel Coated Copper Weight 25 g Dimensions (L x W x H) 1.75 x 1.10 x 0.28 inches 44.50 x 28.00 x 7.00 mm MTBF >1.28Mhrs ( MIL-HDBK -217F, Ground Benign, t=+25C ) Transient recovery deviation 3 % Safety Specifications Parameters Standards Designed to meet IEC/EN 60950-1 Pin Out Specifications Pin Single Dual 1 -V Input -V Input 2 +V Input +V Input 3 +V Output +V Output 4 NP Common 5 -V Output -V Output NP: Not Populated www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C 2 of 3 North America only