MS10

CircuitProtection 2016.QXD CircuitProtection 4/8/16 1:47 PM Page 52 With its high breaking capacity and current limitation the MS Manual MS-Series Motor Controllers provide optimum protection for electrical motors as well as for other consumer units up to 25 amps. They are equipped Three Phase with phase failure sensitivity, isolating and main switch functions. 13 ranges cover nominal rated currents from 0.1 up to 25 amps. Adjustable Trip Economy The MSs are temperature compensated the trip current of the magnetic part is 12 x l . The Manual Motor Controllers are built in n accordance with IEC 947. Manual Motor Controllers with overload and short circuit protection, phase failure sensitivity according to IEC 947-4-1, DIN VDE 0660 Part 102 Type/ Rated Overload Instantaneous 3 Horsepower Rating Cat. No. Current release setting adjustment/FLA (A) (A) 115V 200V 230V 480V 600V Ampere rated for motor circuits having MS016 0.16 0.1 - 0.16 1.92 a full-load-amperage (FLA) not exceeding the MSs general purpose MS025 0.25 0.16 - 0.25 3 rated current and a locked rotor MS04 0.4 0.25 - 0.4 4.8 current not exceeding 6 MS063 0.63 0.4 - 0.63 7.6 times the MSs rated MS1 1.0 0.63 - 1 12 1/2hp 1/2hp current. C US MS1.6 1.6 1 - 16 19.2 3/4hp 1hp E137938 MS2.5 2.5 1.6 - 2.5 30 1/2hp 1/2hp 1hp 11/2hp Type Designation MS4 4.0 2.5 - 4 48 1/2hp 3/4hp 1hp 2hp 3hp MS6.3 6.3 4 - 6.3 75.6 3/4hp 11/2hp 11/2hp 3hp 5hp MS 016 MS10 10.0 6.3 - 10 120 1hp 2hp 3hp 5hp 71/2hp (a) (b) MS16 16.0 10 - 16 192 2hp 3hp 5hp 10hp 10hp (a) = MS - Manual Motor MS20 20.0 16 - 20 240 3hp 5hp 71/2hp 15hp Controller MS25 25.0 20 - 25 300 3hp 5hp 71/2hp 15hp (b) = Rated Current Maximum Voltage 600V AC (MS20 and MS25, 480V AC) Short Circuit Withstanding Rating (UL/CSA Rating) 5kA Group Short Circuit Withstanding Rating (UL/CSA Rating) 5kA Interrupting Capacity 0.16-6.3A: Self protected (VDE - Ratings) 10-25A: 6kA Mechanical Endurance 10,000 on/off operations Standard Pack and Weight 1/250g (0.55lb) Terminal Size Acceptability 14-10 AWG Terminal Torque 1.8Nm (16lb. in.) Dimensions 45mm 42mm (1.77 in.) (1.65 in.) 30mm 63mm 71.5mm (2.81 in.) (1.18 in.) (2.48 in.) 75.5mm (2.97 in.) 85.5mm (3.37 in.) Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 P 908.806-9400 F 908.806.9490 www.altechcorp.com 52 Earth Leakage UL 1077 ANNEX UL 1077 UL 508 UL 489 Circuit Breakers Equipment Breakers 76.5mm (3.01 in.) 80mm (3.15 in.) 45mm (1.77 in.) 35.5mm (1.40 in.) Type/ Rating Std. Cat. No. (A) Pk. GE2-14 63A 1 CircuitProtection 2016.QXD CircuitProtection 4/4/16 12:25 PM Page 53 Accessories MS Three Phase Auxiliary contact blocks for side mounting (3.5A/230V AC 2A/400V AC) Adjustable Trip Economy Width Contacts Type/ Weight Std. Manual Motor Controllers mm Cat. No. g/pc. Pk. 9 2NO HMS20 40 10 9 1NO + 1NC HMS11 40 10 9 1NO HMS10 35 10 9 2NC HMS02 40 10 9 1NC HMS01 35 10 Insulated Enclosure IP55 Emergency-Stop with integrated PE(N) terminal twist or key to release, top and bottom each have 2 red on yellow background metric knock-outs Type/ Weight Std. Release Type/ Weight Std. Cat. No. g/pc. Pk. Type Cat. No. g/pc. Pk. MS.G55 240 1 Twist MS.PV 60 5 Key MS.PS2 65 5 Indicator Light with neon bulb, nominal rated voltage: Flush Mounting Enclosure IP55 220 - 240V or 380 - 440V with integrated PE(N) terminal Color Type/ Weight Std. Type/ Weight Std. Cat. No. g/pc. Pk. Cat. No. g/pc. Pk. 220-240V 380-440V MS.F55 170 1 trans MS.SLW2 MS.SLW3 10 5 green MS.SLG2 MS.SLG3 10 5 red MS.SLR2 MS.SLR3 10 5 yellow MS.SLJ2 MS.SLJ3 10 5 Busbar Type/Cat. No. Busbar for for for for 63A 2 MS 3 MS 4 MS 5 MS no Power Feed Block spacing G45-14-2 G45-14-3 G45-14-4 G45-14-5 with auxiliary switch (1/2 pole) G54-14-2 G54-14-3 G54-14-4 G54-14-5 spacing Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 P 908.806-9400 F 908.806.9490 www.altechcorp.com 53 Earth Leakage UL 1077 ANNEX UL 1077 UL 508 UL 489 Circuit Breakers Equipment Breakers