STH4DTSH Altech

Hinge Type Stud Block STH4 STH4DT STH4DTSH STH Series Terminal Blocks are preferred for application where the con- nections are subjected to severe vibration. The wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. The hinged carrier should be lifted to insert the lugs and then fastened to complete the Terminal Width 11 mm 11 mm 22 mm connection. Height x Length 50.5 x 46 mm 50.5 x 86 mm 50.5 x 86 mm By virtue of the hinged design, the Terminal Stripping Length 10 mm 10 mm 10 mm Blocks apart from shroud- ing the live parts, provid- Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 ing IP 20 (Finger Safe) pro- Type of Connection 2 stud flat connection 2 stud flat connection 2 stud flat connection tection, save considerable time in wiring. Stud Size / Operated by M4 / Screwdriver M4 / Screwdriver M4 / Screwdriver Two Lugs can be connect- Approvals ed to the Terminal, without 60947-7-1 E220514 60947-7-1 E220514 60947-7-1 E220514 sacrificing the safety of the Terminal Block. Wire Range 22-8 AWG 1.5-6 sq.mm 22-8 AWG 22-8 AWG 1.5-6 sq.mm 22-8 AWG 22-8 AWG 1.5-6 sq.mm 22-8 AWG Voltage Rating 600 V 1000 V 600 V 600 V 1000 V 600 V 600 V 1000 V 300 V STH4DT Disconnect & Test Terminal Block is used for Current Rating 50 A 41 A 50 A 35 A 41 A 35 A 35 A 34 A 25 A measuring, control and regulatory circuits. They Torque 14 lb-in 1.2 Nm 14 lb-in 14 lb-in 1.2 Nm 14 lb-in 14 lb-in 1.2 Nm 14 lb-in provide a clear functional advantage for devices Other Approvals having utility instruments and associated transform- ers. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block STH4 100 STH4DT 100 STH4DTSH 100 Socket Headed Screws act as test monitoring point End Plate EPSTH4 50 EPSTH4DT 50 EPSTH4DT 50 on either side of the Terminal Block. Discon- DIN Rail nection is achieved by for ordering information means of a slide link oper- refer to pages 90-91 ated with a Screw Driver. End Stop CA702 100 CA702 100 CA702 100 for ordering info. CA802 50 CA802 50 CA802 50 STH4DTSH Terminal Block refer to page 92 has 2 STH4DT Terminal Block shorted to achieve 2 way Removable CA512/13-2 100 CA512/13-2 100 CA512/13-2 100 switchable cross connec- Shorting Link 3 way CA512/13-3 50 CA512/13-3 50 CA512/13-3 50 tion (on one side). 4 way CA512/13-4 50 CA512/13-4 50 CA512/13-4 50 Note: The disconnecting Insulated Removable 2 way CA514/13-2 100 CA514/13-2 100 CA514/13-2 100 device is not suitable for Shorting Link CA514/13-3 50 CA514/13-3 50 CA514/13-3 50 3 way 4 way CA514/13-4 50 CA514/13-4 50 CA514/13-4 50 interrupting load. The sup- ply must be switched off 2 way Permanant CA512/14-2 100 CA512/14-2 100 CA512/14-2 100 before operating the slide Shorting Link 3 way CA512/14-3 50 CA512/14-3 50 CA512/14-3 50 link / moving the hinged 4 way CA512/14-4 50 CA512/14-4 50 CA512/14-4 50 carrier. Insulated Permanent 2 way CA514/14-2 100 CA514/14-2 100 CA514/14-2 100 Jumpers 3 way CA514/14-3 50 CA514/14-3 50 CA514/14-3 50 4 way CA514/14-4 50 CA514/14-4 50 CA514/14-4 50 Marking Tags MT10 100 MT10 100 MT10 100 52 Altech Corp. 35 Royal Road Flemington, NJ 08822-6000 Phone (908)806-9400 FAX (908)806-9490 www.altechcorp.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Terminal Block Tools & Accessories category: Click to view products by Altech manufacturer: Other Similar products are found below : 1029563 00171430102 00171420102 014415 CSTSPC1-2 9-1437653-4 928358-1 QC209/J HCL10-6 1437403-6 1437403-9 1437403-8 147832-1 EC0037-000 MT2/H-- MT2/H-32 MT6/H-N MT6/V-GRND MT8/H-101-110 BB2-09BF EP2.5/4UN/BG 1707755 1735590 1755480 1760336 BO3-02 1789281 1840227 1840230 1893164 2-1437402-1 2-1437644-9 JB2-09/J 2202307 2302463 2305949 2310581 8TK2-24 91.201.1 L2U2 2778.0 2890137 2901107 2901123 2901699 2MP/J 2MV-06 1705126 1756294 F03-25