EVAL-ADM3051EBZ Analog Devices

High Speed Industrial CAN Transceiver with Bus Protection for 24 V Systems Data Sheet ADM3051 FEATURES FUNCTIONAL BLOCK DIAGRAM V CC Physical layer CAN transceiver 5 V operation on V CC THERMAL Complies with ISO 11898 standard SHUTDOWN High speed data rates up to 1 Mbps Short-circuit protection on CANH and CANL against shorts to TxD D power/ground in 24 V systems Unpowered nodes do not disturb the bus RS MODE Connect 110 or more nodes on the bus Slope control for reduced EMI CANH R RxD Thermal shutdown protection CANL Low current standby mode VOLTAGE V Industrial operating temperature range (40C to +125C) REF REFERENCE Available in 8-lead SOIC package ADM3051 APPLICATIONS GND CAN data buses Figure 1. Industrial field networks DeviceNet applications CanOpen, CanKingdom GENERAL DESCRIPTION The ADM3051 is a controller area network (CAN) physical Three operating modes are available: high speed, slope control, layer transceiver allowing a protocol layer CAN controller to and standby. Pin 8 (RS) is used to select the operating mode. access the physical layer bus. The ADM3051 complies with The low current standby mode can be selected by applying a the ISO 11898 standard. It is capable of running at data rates up logic high to RS. to 1 Mbps. The device can be set to operate with slope control to limit EMI The device has current-limiting and thermal shutdown features by connecting RS with a resistor to ground to modify the rise to protect against output short circuits and situations where the and fall of slopes. This mode facilitates the use of unshielded bus may be shorted to ground or power terminals in 24 V bus cables. Alternatively, disabling slope control by connecting RS power systems. The part is fully specified over the industrial to ground allows high speed operation. Shielded cables or other temperature range of 40C to +125C and is available in an measures to control EMI are necessary in this mode. 8-lead SOIC package. Rev. A Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. rights of third parties that may result from its use. Specifications subject to change without notice. No Tel: 781.329.4700 20112016 Analog Devices, Inc. All rights reserved. license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Technical Support www.analog.com Trademarks and registered trademarks are the property of their respective owners. 10029-001ADM3051 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Typical Performance Characteristics ..............................................7 Applications ....................................................................................... 1 Test Circuits and Switching Characteristics ................................ 11 Functional Block Diagram .............................................................. 1 Circuit Description......................................................................... 13 General Description ......................................................................... 1 CAN Transceiver Operation ..................................................... 13 Revision History ............................................................................... 2 Operational Modes .................................................................... 13 Specif icat ions ..................................................................................... 3 Truth Tables................................................................................. 13 Timing Specifications .................................................................. 4 Thermal Shutdown .................................................................... 13 Absolute Maximum Ratings ............................................................ 5 Applications Information .............................................................. 14 ESD Caution .................................................................................. 5 Outline Dimensions ....................................................................... 15 Pin Configuration and Function Descriptions ............................. 6 Ordering Guide .......................................................................... 15 REVISION HISTORY 5/2016Rev.0 to Rev. A Changes to Ordering Guide .......................................................... 15 9/2011Revision 0: Initial Version Rev. A Page 2 of 16