EVAL-ADUMQSEBZ Analog Devices

EVAL-ADuMQSEBZ User Guide UG-042 One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com Evaluating the 16-Lead SOIC and the 16-Lead QSOP Digital Isolators FEATURES SUPPORTED iCOUPLER MODELS Convenient connections for power through screw ADuM130x terminal blocks ADuM131x Add-on BNC connector for 50 signal sources ADuM140x On-board signal routing ADuM141x Support for signal wrap back ADuM1510 Simple signal paths to reduce transmission line effects ADuM240x Pull-up and pull-down provided for control lines ADuM330x Support for isoPower ADuM340x Project area that supports surface-mount and through-hole ADuM344x devices ADuM5000 ADuM520x GENERAL DESCRIPTION ADuM540x The EVAL-ADuMQSEBZ can be used with most iCoupler ADuM6000 isolation products in the 16-lead, wide-body SOIC and QSOP ADuM620x packages. The evaluation board supports the common pad ADuM640x positions for power, ground, and input/output pins found in ADuM744x nearly all of the iCoupler products and is a configurable board ADuM7510 that can be adapted to many iCoupler products. EVALUATION BOARD Figure 1. PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS. Rev. C Page 1 of 8 08414-001UG-042 EVAL-ADuMQSEBZ User Guide TABLE OF CONTENTS Features .............................................................................................. 1 Terminals ........................................................................................3 General Description ......................................................................... 1 Data Input/Output Connections .................................................5 Supported iCoupler Models ............................................................ 1 Design Area ....................................................................................5 Evaluation Board .............................................................................. 1 Evaluation Board Schematic and Layout .......................................6 Revision History ............................................................................... 2 Ordering Information .......................................................................8 Evaluation Board Hardware ............................................................ 3 Bill of Materials ..............................................................................8 Pad Layout for the Device Under Test (DUT) .......................... 3 REVISION HISTORY 11/2016Rev. B to Rev. C Changes to Supported iCoupler Models Section ......................... 1 10/2015Rev. A to Rev. B Changes to Supported iCoupler Models Section ......................... 1 12/2010Rev. 0 to Rev. A Changes to Supported iCoupler Models Section ......................... 1 1/2010Revision 0: Initial Version Rev. C Page 2 of 8