EVAL-SDP-CB1Z

SDP User Guide UG-277 One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com SDP-B Controller Board INTRODUCTION This user guide describes the EVAL-SDP-CB1Z system The SDP-B board is designed to be used in conjunction with demonstration platformBlackfin (SDP-B) controller board various Analog Devices component evaluation boards and from Analog Devices, Inc. The SDP-B controller board is part Circuits from the Lab reference circuits as part of a customer of the Analog Devices system demonstration platform (SDP). evaluation environment. The SDP-B provides USB connectivity The SDP consists of a series of controller boards, interposer through a USB 2.0 high speed connection to the computer boards, and daughter boards. allowing users to evaluate components on this platform from a PC application. The SDP-B is based on ADSP-BF527 Blackfin SDP controller boards provide a means of communicating with processor, with the Blackfin processor peripheral communi- the PC from the system under evaluation. Interposer boards cation lines available to the component daughter board through route signals between two connectors. Daughter boards are a two identical 120-pin small footprint connectors. collection of product evaluation boards and Circuits from the Lab reference circuit boards. The SDP-B is used as part of the The SDP-B user guide provides instructions for installing the evaluation system for many Analog Devices components and SDP-B hardware (EVAL-SDP-CB1Z board) and software onto reference circuits. The primary audience for this user guide is a your computer. The necessary installation files are provided system engineer who seeks to understand how to set up the with the evaluation daughter board package. The Getting SDP-B board and begin USB communications to the PC. Started section provides software and hardware installation procedures, PC system requirements, and basic board informa- tion. The Hardware Description section provides information on the EVAL-SDP-CB1Z components. The EVAL-SDP-CB1Z schematics are provided in the Schematics section. PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS. Rev. B Page 1 of 24 UG-277 SDP User Guide TABLE OF CONTENTS Introduction ...................................................................................... 1 USB Installation .............................................................................4 Revision History ............................................................................... 2 Powering Up/Powering Down the SDP .....................................4 Product Overview ............................................................................. 3 Hardware Description.......................................................................5 Technical or Customer Support.................................................. 3 LEDs ................................................................................................5 Product Information .................................................................... 3 Connector Details .........................................................................5 Regulatory Compliance ............................................................... 3 Power............................................................................................ 10 Getting Started .................................................................................. 4 Daughter Board Design Guidelines ......................................... 10 Package Contents .......................................................................... 4 Mechanical Specifications ......................................................... 12 PC Configuration ......................................................................... 4 Schematics ....................................................................................... 13 REVISION HISTORY 12/11Rev. A to Rev. B Changes to Figure 7 ........................................................................ 14 Changes to Figure 8 ........................................................................ 15 Changes to Figure 9 ........................................................................ 16 Changes to Figure 10 ...................................................................... 17 Changes to Figure 11 ...................................................................... 18 Changes to Figure 12 ...................................................................... 19 Changes to Figure 13 ...................................................................... 20 10/11Rev. 0 to Rev. A Change to Product Overview Section ............................................ 3 Replaced Hardware Description Section ..................................... 15 Replaced Schematics Section ........................................................ 13 6/11Revision 0: Initial Version Rev. B Page 2 of 24