TMCM-310 Analog Devices

MODULES FOR STEPPER MOTORS MODULES T M C M - 3 1 0 3-Axis Controller / Driver 1.1A / 34V 10 mm MAIN CHARACTERISTICS INFO The TMCM-310 is a triple axis 2-phase stepper motor controller ELECTRICAL up to 1.1A coil current RMS (1.5A peak) DATA and driver module. It provides a complete single board motion 8V to 34V supply voltage control solution at low cost. Using the integrated additional SUPPORTED two-phase bipolar motors with MOTORS I/Os it even can do complete system control applications. 0.3A to 1.1A coil current The motors and switches can be connected easily with screw INTERFACE RS-232 and optional CAN 2.0b host interface terminals. The connection of the multi purpose I/Os can be inputs for reference and stop switches done via a dual-in-line pin connector. The TMCM-310 comes with general purpose analog and digital I/Os the PC based software development environment TMCL-IDE for FEATURES up to 16 times microstepping the Trinamic Motion Control Language (TMCL). Using predefined memory for 2048 TMCL commands TMCL high level commands like move to position or constant automatic ramp generation in hardware rotation rapid and fast development of motion control applica- on the fly alteration of motion parameters (e.g. position, velocity, acceleration) tions is guaranteed. The TMCM-310 can be controlled via the stallGuard feature for sensorless RS-232 or the optional CAN interface. Communication traffic is stall detection kept very low since all time critical operations, e.g. ramp cal- full step frequencies up to 20kHz culation are performed on board. A user TMCL program can be dynamic current control stored in the on board EEPROM for stand-alone operation. The TRINAMIC driver technology: firmware of the module can be updated via the serial interface. no heatsink required With the stallGuard feature it is possible to detect overload SOFTWARE stand-alone operation using TMCL and stall of the motor. or remote controlled operation PC-based application development software TMCL-IDE included Step TMCM-310 TMCL OTHER pluggable / screw terminal connectors Driver Memory 16 TMC246 I/Os Motor RoHS compliant Step programmable size: 160 x 100 mm RS-232 Driver Motion TMC246 Controller Motor with TMC428 CAN (option) Step Driver TMC246 7..34V DC Motor 6 5V Power Supply REF-Switches ORDER CODE DESCRIPTION TMCM-310/SG 3-axis controller / driver module 1.1A / 34V with stallGuard TMCM-310/SG-CAN 3-axis controller / driver module 1.1A / 34V with stallGuard and CAN www.trinamic.com for detailed information and datasheets 38X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for trinamic manufacturer: Other Similar products are found below : TMC2041-EVAL-KIT TMCM-3213 TMCM-343-H-TMCL PD86-3-1180-CANOPEN QSH6018-65-28-210 TMCS-40-KIT QSH8618-95-55- 700 TMC-UPS-10A70V-EVAL TMC-UPS-2A24V-EVAL TMC5031-EVAL-KIT TMCM-6214-CABLE PD42-2-1240-TMCL TMCM-1021 TMC424 PD57-2-1060-TMCL TMCM-3230-CANOPEN TMCM-3312-TMCL TMCM-3313 TMC4330-EVAL PD-1141-CABLE PD42-2- 1141 PD57-1-1160-TMCL PD60-3-1160-TMCL PD42-3-1241-CANOPEN PD57-1-1276-CANOPEN PD57-2-1276-CANOPEN PD57-2- 1276-TMCL TMCM-1311 QSH5718-51-28-101 QSH5718-76-28-189 TMCM-3212-CANOPEN TMCM-3214-CANOPEN TMCM-3214- TMCL TMCM-3215 TMCM-3312-CANOPEN TMCM-6210-CANOPEN TMCM-6210-TMCL TMCM-6212-CANOPEN TMCM-6213 PD42-1-1270-CANOPEN PD42-3-1140-TMCL PD42-3-1141 TMC261-BOB TMCM-1241-CANOPEN TMC8670-EVAL PD57-1-1276- TMCL PD60-3-1276-TMCL TMC-SCHRAUBSTOCK TMCM-BB1 TMCM-3110-TMCL