EZ4x Module Series The A1101R09C-EZ4x is a high-performance demonstration platform, designed to showcase Anaren s family of FCC & IC certified AIR Modules. It features an A1101R09C AIR 900 MHz connectorized Module, and is designed to quickly connect to the Texas Instruments eZ430 Development Kit battery board or USB A1101R09C-EZ4x debugging interface Product Overview button connector receptacle. This module is The A1101R09C-EZ4x is a target board assembly designed to effortlessly integrate into a wide range with the Anaren A1101R09C radio module in the industrys smallest package (9 x 12 x 2.5mm) of applications, including: industrial control, building automation, low-power wireless sensor networks, mounted on it. lighting control, and automated meter reading. This module is fully compliant with Texas Instruments eZ430-RF2500 Development Kit, and plugs directly into either the battery board or USB debugging interface via the 6 pin header. It is designed to be a direct-replacement for the access point and end point target board modules included with the Texas Instrument eZ430- RF2500 Development Kit. Each Anaren A1101R09C Radio Module is FCC & IC certified and incorporates the Texas Instruments CC1101 transceiver chip. As a stand-alone module for your final design implementation, Anarens A1101R09C has an LGA pad footprint with an industry-standard U.FL Layout Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 800.411.6596 / Nomenclature Pin Diagram EZ4x Connections A (Anaren) 1 Chip series (CC1101, CC110L, CC2500) 2 Function (R = radio only) 3 Frequency band (x100MHz) 4 Form factor (A = Internal Antenna, C = Connector) 5 Module Type (EM1 = Eval Module, EZ4x = EZ-430 Module) 6 Firmware (EZ4 only) (A = Access Point, E = End Point, Battery / USB: X = Custom (or no firmware) ST1 P3.4 / UCA0TXD / UCA0SIMO ST2 GND ST3 RST / SBWTDIO To view the entire available family of AIR Modules & ST4 TEST / SBWTCK ST5 VCC (3.6V) Development options, please visit our website at: ST6 P3.5 / UCA0RXD / UCA0SOMI