Model PD2425J5050S2 Rev A Ultra Low Profile 0805 Power Divider 50 to 50 Description The PD2425J5050S2 is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2425J5050S2 is ideal for high volume manufacturing and delivers higher performances than traditional printed and lumped element solutions. The PD2425J5050S2 is matched to 50 and has a height profile of 0.5 mm which is ideal for high level integrations in the following markets: WiMAX, 802.11b & g, Bluetooth, ZigBee, and XM & Sirius radio. The PD2425J5050S2 does not include the resistive element and therefore, requires an external resistor for operation. The PD2425J5050S2 is available on tape and reel for high volume manufacturing pick and place. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25C) Features: Parameter Min. Typ. Max Unit 2400-2500 MHz Frequency 2400 2500 MHz 22 dB Isolation (output ports) Input Port Impedance 50 Good Return Loss Output Port Impedance 50 0.5 mm Height Profile Return Loss 18 25 dB 50 Input / 50 Outputs Low Insertion Loss Insertion Loss* 0.3 0.4 dB Surface Mountable Amplitude Balance 0.1 0.2 dB Tape & Reel Phase Balance 1 2 Degrees Non-conductive Surface Isolation (Output Ports) 22 33 dB RoHS Compliant Power Handling 2 Watts External Resistor Required Operating Temperature -55 +85 C * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 C) Outline Drawing Top View (Near-side) Side View Bottom View (Far-side) .079.004 2X .026 2.000.10 .021.002 0.65 0.530.05 1 2 3 .039 0.98 6X .009 .049.004 0.22 1.250.10 Orientation 6 5 4 Orientation Marker Denotes 6X .012 Marker Denotes Pin Location 0.30 Pin Location Pin Designation 1 GND 2 Input 3 GND 4 Output 1 Dimensions are in Inches Millimeters 5 GND Mechanical Outline Tolerances are Non-Cumulative 6 Output 2 USA/Canada: (315) 432-8909 Available on Tape Toll Free: and Reel for Pick and (800) 411-6596 Place Manufacturing. +44 2392-232392 Europe: Mode l PD2425J5050S2 Rev A Typical Broadband Performance: 500 MHz. to 8.0 GHz. Return Loss - Input Insertion Loss 0 0 -3 -3 -6 -6 -9 -9 -12 -12 -15 -15 -18 -18 -21 -21 -24 -24 -27 -27 -30 -30 -33 -33 -36 -36 Frequency MHz Frequency MHz Amplitude Balance Phase Balance 20 2 15 1.5 10 1 5 0.5 0 0 -0.5 -5 -1 -10 -1.5 -15 -2 -20 Frequency MHz Frequency MHz Isolation 0 -3 -6 -9 -12 -15 -18 -21 -24 -27 -30 -33 -36 Frequency MHz USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Place Toll Free: (800) 411-6596 Manufacturing. Europe: +44 2392-232392 dB dB dB 500 500 500 1000 1000 1000 1500 1500 1500 2000 2000 2000 2500 2500 2500 3000 3000 3000 3500 3500 3500 4000 4000 4000 4500 4500 4500 5000 5000 5000 5500 5500 5500 6000 6000 6000 6500 6500 6500 7000 7000 7000 7500 7500 7500 8000 8000 8000 deg dB 500 500 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 3500 3500 4000 4000 4500 4500 5000 5000 5500 5500 6000 6000 6500 6500 7000 7000 7500 7500 8000 8000