Model XC1900A-03 Rev E PRELIMINARY Hybrid Coupler 3 dB, 90 Description The XC1900A-03 is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for DCS and PCS band applications. The XC1900A-03 is designed particularly for balanced power and low noise amplifiers, plus signal distribution and other applications where low insertion loss and tight amplitude and phase balance is required. It can be used in high power applications up to 150 Watts. Parts have been subjected to rigorous qualification testing and they are manufactured using materials with coefficients of thermal expansion (CTE) compatible with common substrates such as FR4, G-10, RF-35, RO4350 and polyimide. Available in both 5 of 6 tin lead (XC1900A-03P) and 6 of 6 tin immersion (XC1900A-03S) RoHS compliant finishes. Electrical Specifications ** Features: Insertion Amplitude Frequency Isolation VSWR 1400-2000 MHz Loss Balance MHz dB Min dB Max Max : 1 dB Max DCS and PCS High Power 1400-1500 23 0.08 1.15 0 to -0.4 Very Low Loss 1700-2000 25 0.15 1.15 0.13 Tight Amplitude Balance 1805-1880 27 0.12 1.12 0.10 High Isolation 1930-1990 27 0.12 1.12 0.10 Production Friendly Operating Phase Power JC Temp. Tape and Reel Available in Lead-Free (as Degrees Avg. CW Watts C/Watt C illustrated) or Tin-Lead 90 2.0 150 28 -55 to +95 Reliable, FIT=0.53 90 2.0 150 28 -55 to +95 90 2.0 150 28 -55 to +95 90 2.0 150 28 -55 to +95 **Specification based on performance of unit properly installed on Anaren Test Board 58481-0001 with small signal applied. Specifications subject to change without notice. Refer to parameter definitions for details014 .069 0.35 1.75 .010 .560 .004 4X .040 0.25 14.22 1.020.10 Pin 1 Pin 1 Pin 2 Pin 2 GND Orientation .010 .004 .350 .220 Marker Denotes .004 4X .059 SQ 0.25 0.10 8.89 5.59 Pin 1 0.10 1.50 .004 .430 Pin 4 Pin 3 Denotes GND Pin 3 Pin 4 0.10 10.92 Array Number USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Toll Free: (800) 411-6596 Place Manufacturing. +44 2392-232392 Europe: Top View (Near-Side) Bottom View (Far-Side) Side View Dimensions are in Inches Millimeters *For RoHS Compliant Versions order w th S suff i ix Tolerances are Non-Cumulative XC1900A-03* Mechanical OutlineModel XC1 900A-03 Rev E Hybrid Coupler Pin Configuration The XC1900A-03 has an orientation marker to denote Pin 1. Once port one has been identified the other ports are known automatically. Please see the chart below for clarification: Configuration Pin 1 Pin 2 Pin 3 Pin 4 Splitter Input Isolated -3dB 90 -3dB Splitter Isolated Input -3dB -3dB 90 Splitter Input Isolated -3dB 90 -3dB Splitter Isolated Input -3dB -3dB 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 *Note: A is the amplitude of the applied signals. When two quadrature signals with equal amplitudes are applied to the coupler as described in the table, they will combine at the output port. If the amplitudes are not equal, some of the applied energy will be directed to the isolated port. USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Place Toll Free: (800) 411-6596 Manufacturing. Europe: +44 2392-232392