114916P4

3 Position Mini PL SPEC Pak is a rugged and environmentally sealed (IP68) connector with a manually operated release latch. The 3 Position Mini PL leverages PowerMod pin and socket contact technology, delivering capabilities up to 22 amps at 600 volts while handling wires from 24 to 12 AWG (0.5 to 2.5 mm). The 30 gold plated pins are available in 3 lengths, enabling sequenced contact mating options. These contacts sit inside a UV and flame resistant shells that are touch safe on both sides. Features Manual Release Latch Prevents accidental un-mating Pin & Socket Contact Technology Gold plated for greater conductivity 3 Pin Lengths Available Offers sequencing capabilities Touch Safe per UL 1977 Sec. 10.2 Touch safe on both pin & socket sides Mechanical Rugged & Environmentally Sealed Shells Environmental Seal F1 weatherability rating per UL 746C IEC IP 68 V0 flammability rating per UL 94 UL 50E IP68, exceeds industry standards Wire Size 24 to 12 AWG 0.5 to 2.5 mm Materials Shell PC Sealing Options Sealing Gland Latch PC Operating Temperature -20 to 105C -4 to 221F Flammability UL 94 V-0 Mating Cycles (no load) 500 Electrical Weatherability UL764C / 12 mm, F1 Current Rating (Amperes) Contact Retention Force 10 lbf Contacts UL 1977 22 44 N Socket Body Copper Alloy, CSA (30C Rise) 16 200 inch Sn over Ni Mating Force (nominal) 5 lb Voltage Rating 22 N Socket Contact Copper Alloy, UL 1977 (AC/DC) 600 30 inch Au over Ni Touch Safe (UL 1977 Sec 10.2) Pass Dielectric Withstanding (AC) 2200 Pin Copper Alloy, Latch Strength (nominal) 24 lb 30 inch Au over Ni Contact Resistance (average) 3 Milliohms 107 N NOTE: Sn = tin Ni = nickel Au = Gold All Data Subject To Change Without Notice UL Pending Step 2 - Select Sealing Gland ORDERING INFORMATION SPEC Pak Mini PL Series is a highly configurable Step 1 - Select Shell environmentally sealed connector that can be purchased as component in bulk for volume production, or pre-packaged as a kit. Configuring a connector is an easy three step process. Step 3 - Select Contacts Step 1: Select Shell SPEC Pak Shell Kits (sealing glands & contacts sold separately) Description - Part Numbers - Mates With: OR Minimum Quantity ............... 25 ... Male, Receptacle Shell SK1-019M03 Female, Plug SK6-019M03 Female, Jam Nut SK7-019M03 SK1-019M03 SK6-019M03 SK7-019M03 Female, Cover SK9F-019 Male Receptacle Female Plug Female Panel, Jam Nut Male, Cover SK9M-019 Step 2: Select Sealing Gland FAQ Q: Do I need a sealing gland A: For IP68 rating, sealing glands are required with SK1-019M03 & SK6-019M03. A: For splash resistance in the unmated condition, use optional wire sealing grommets with SK7-019M03. (See accessories on page 4). Q: How do I select the appropriate sealing gland A: Identify the number of wires that will be used. Number of wires: Identify the outer diameter (OD) of those wire(s). OD of the wires: Material Bundled Cable Discrete Wires Shell PC Cable Range Cable Range Wire Outer Connector Wire Outer Connector Sealing Grommet EPDM Number Diameter (OD) Part Kit Number Diameter (OD) Part Kit Flammability UL94 V0 of Wires mm (in) - Numbers - Designation mm (in) Designation of Wires - Numbers - Color Black Minimum Quantity .............. 25 ............................. Minimum Quantity .............. 25 ............................. 2 0.75 to 1.5 PS2T20-2X PM 21 3.0 to 4.5 PS1T20-5X PS 01 1 Torque Requirements (0.03 to 0.06) (0.12 to 0.18) .................................................................................................................................................................................................................. 2 1.5 to 2.6 PM 22 PS1T20-7X PS2T20-3X Hand tighten until snug, using 1 4.5 to 6.5 PS 02 (0.06 to 0.10) (0.18 to 0.26) a wrench tighten an additional .................................................................................................................................................................................................................. 0.75 to 1.5 PM 31 1/4 to 1/2 turn. 3 PS3T20-2X 1 6.5 to 8.5 PS1T20-9X PS 03 (0.03 to 0.06) (0.26 to 0.33) Wrench Size 22 .................................................................................................................................................................................................................. 3 1.6 to 2.6 PS3T20-3X PM 32 8.5 to 10.0 PS1T20-10X PS 04 1 (0.06 to 0.10) (0.33 to 0.39) .................................................................................................................................................................................................................. Mechanical 3 4.0 to 4.8 PS3T20-5X PM 35 1 PS 05 10.0 to 11.5 PS1T20-12X (0.16 to 0.19) Operating Temperature (0.39 to 0.45) -20 to 105C -4 to 221F www.andersonpower.com All Data Subject To Change Without Notice