Power Clip Dual Pole Connector Series The Anderson Power Products Dual Pole FEATURES Power Clip is designed as a low cost interconnection between two perpendicular High 300A Current Rating power bus bars. The products high performance contacts offer low voltage drop Small size provides dense power packaging and superior amperage carrying capability. There is no mating connector to the Dual Mates with .125 inches or 3mm flat Pole Power Clip as it accepts a solid .125 Bus Bar Blade inches or 3mm thick nickel or gold plated Simplifies construction and lowers cost rectangular bus bar tab. The product is often used inN+1 rectifier, Blind Mating Design power supply and switching power supply Allows greater vertical chassis manufacturing applications. The Dual Pole Power Clip s tolerances design enables the connector to be blind mated in the deepest racks. UL and CUR Recognized The Dual Pole design allows for mating to a Product safety and electrical performance has two pole laminated bus bar or double sided been verified to the highest standards PSB tab. This will allow for feed and return with one single socket. The Dual Pole Power Clip is recognized to UL1977 and CSA standard C22.2 and is rated for up to 300 amps continuous service. PRODUCT SPECIFICATIONS Electrical Mechanical Materials Current Rating (Amperes) (1) Insertion Force (lbs) 20 Housing PBT UL94 V-0 UL 300 (N) 89 Contact Plating (mating surface) Minimum 0.76 microns Au over Ni CSA (30C Rise) 200 Extraction Force (lbs) 10 UL / CSA Voltage Rating (AC/DC) 600 (N) 44 Operating Temperature Range (C) -40 to 105 (F) -40 to 221 (1) Ratings using nickel plated tab Average Contact Resistance 55 (micro-ohm) TEMPERATURE CHART ORDERING INFORMATION Dual Pole Power Clip Performance Complete Connector 90 20.0 80 18.0 Part 16.0 70 Number Description 14.0 60 PCL03 Dual Pole Power Clip Connector 12.0 50 10.0 40 8.0 30 6.0 20 4.0 10 2.0 0 0.0 150 200 250 300 350 Amperes Applied Temperature Rise C milli-Volt Drop The graph shows the Dual Pole Power Clip electrical performance in terms of temperature rise and voltage drop at currents from 150A to 350A. The set up for the test consisted of the following: Six Power Clips were mounted on a bus bar that was 0.25 x 1.75 x 6.0 inches in diameter. The test samples were connected in series using 1/0 AWG wire attached to a 1 long and .125 thick nickel plated mating blades. Temperature (C) Voltage Drop (mV)DIMENSIONS Side View 1.18 29.9 0.85 21.5 0.025 0.64 MATL THICKNESS Top View 1.00 25.4 1.25 31.8 Mating Blade - Required Dimensions 3.23 2.97 .127 .117 25.4 16.5 1.00 LEAD-IN GEOMETRY .65 MUST BE FULL RADIUS OR CHAMFER .050 1.27 X 45 (2) PLC S 25.400.38 1.000.015 All Data Subject To Change Without Notice 15748 DS-DPPCLIP REV 06 HEADQUARTERS: Anderson Power Products, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700 EUROPE: Anderson Power Products Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 520203 ASIA / PACIFIC: IDEAL Anderson Asia Pacific Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836 F:+(852) 2635 9036 CHINA: IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 Tantou Western Industrial Park, Songgang Baoan District, Shenzhen, PR. China 518105 T: +(86) 755 2768 2118 F: +(86) 755 2768 2218 TAIWAN: IDEAL Anderson Asia Pacific Ltd., Taiwan Branch, 4F.-2, No.116, Dadun 20th St., Situn District, Taichung City 407, Taiwan (R.O.C.) T: +(886) 4 2310 6451 F:+(886) 4 2310 6460 www.andersonpower.com