EMRA43P2H-100.000M (Data Sheet downloaded on Mar 5, 2019) REGULATORY COMPLIANCE 2011/65 + 191 SVHC 2015/863 ITEM DESCRIPTION MEMS Clock Oscillators LVCMOS (CMOS) 3.3Vdc 4 Pad 2.0mm x 2.5mm Plastic Surface Mount (SMD) 100.000MHz 50ppm over -40C to +105C ELECTRICAL SPECIFICATIONS Nominal Frequency 100.000MHz Frequency Tolerance/Stability 50ppm Maximum over -40C to +105C (Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, and Output Load Change) Aging at 25C 1.5ppm Maximum First Year Supply Voltage 3.3Vdc 10% Input Current 9mA Maximum (No Load) Output Voltage Logic High (Voh) 90% of Vdd Minimum (IOH = -4mA) Output Voltage Logic Low (Vol) 10% of Vdd Maximum (IOL = +4mA) Rise/Fall Time 1.2nSec Typical, 3nSec Maximum (Measured from 20% to 80% of waveform) Duty Cycle 50 5(%) (Measured at 50% of waveform) Load Drive Capability 15pF Maximum Output Logic Type CMOS Output Control Function Tri-State (Disabled Output: High Impedance) Output Control Input Voltage Logic 70% of Vdd Minimum or No Connect to Enable Output High (Vih) Output Control Input Voltage Logic 30% of Vdd Maximum to Disable Output Low (Vil) Tri-State Output Enable Time 150nSec Maximum Tri-State Output Disable Time 150nSec Maximum Period Jitter (RMS) 2pSec Typical, 4pSec Maximum RMS Phase Jitter (Fj = 900kHz to 0.5pSec Typical, 1pSec Maximum 7.5MHz Random) RMS Phase Jitter (Fj = 12kHz to 1.5pSec Typical, 3pSec Maximum 20MHz Random) Start Up Time 5mSec Maximum Storage Temperature Range -65C to +150C ENVIRONMENTAL & MECHANICAL SPECIFICATIONS ESD Susceptibility JESD22-A114, HBM, 2000V Flammability UL94-V0 Mechanical Shock MIL-STD-883, Method 2002, Condition E, 10,000G Moisture Sensitivity J-STD-020, MSL 1 Solderability MIL-STD-883, Method 2003 (Four I/O Pads on bottom of package only) Temperature Cycling JESD22-A104, Condition B Vibration MIL-STD-883, Method 2007, Condition A, 20G www.ecliptek.com Specification Subject to Change Without Notice Revision D 11/15/2016 Page 1 of 6 Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200EMRA43P2H-100.000M MECHANICAL DIMENSIONS (all dimensions in millimeters) PIN CONNECTION 1 Tri-State (High Impedance) 2.00 2 Ground 0.85 0.50 0.05 MAX 0.05 (x4) 3 Output 4 Supply Voltage 4 1 LINE MARKING 2.50 1.00 1 Ecliptek Manufacturing 0.05 0.05 Identifier 3 2 0.75 0.05 (x4) 1.10 0.05 Suggested Solder Pad Layout All Dimensions in Millimeters 1.00 (X4) 1.10 (X4) Solder Land 0.80 (X4) 0.50 All Tolerances are 0.1 www.ecliptek.com Specification Subject to Change Without Notice Revision D 11/15/2016 Page 2 of 6 Ecliptek, LLC 5458 Louie Lane, Reno, NV 89511 1-800-ECLIPTEK or 714.433.1200