RoHS Recast Compliant Serial ATA Flash Drive SM210-M280 Product Specifications December 4, 2017 Version 1.8 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Features: Standard SATA Interface Compliance Temperature Range Serial ATA Revision 3.2 compliance Operating: SATA 6.0 Gbps interface Standard: 0C to 70C ATA-8 command set Extended: -40C to 85C Storage: -40C to 100C Capacity Supply Voltage Single side: 32, 64, 128, 256 GB Double side: 512 GB 3.3 V 5% Performance* Power Consumption* Burst read/write: 600 MB/sec Active mode: 1,210 mA Sequential read: Up to 510 MB/sec Idle mode: 140 mA Sequential write: Up to 475 MB/sec Connector Type Random read (4K): Up to 82,000 IOPS 75-pin SATA-based M.2 module pinout Random write (4K): Up to 79,000 IOPS Form Factor Flash Management M.2 2280 form factor Built-in hardware ECC Dimensions: Global Wear Leveling Single side: 80.00 x 22.00 x 1.50, unit: Flash bad-block management Double side: 80.00 x 22.00 x 3.60, unit: S.M.A.R.T. Shock & Vibration** Power Failure Management ATA Secure Erase Shock:1,500 G TRIM Vibration: 15 G NAND Flash Type: MLC DRAM Cache for Enhanced Random Performance MTBF: >1,000,000 hours Device Sleep (optional) Endurance (in Terabytes Written: TBW) RoHS Recast Compliant (Complies with 2011/65/EU Standard) 32 GB: 61 TBW 64 GB: 129 TBW 128 GB: 276 TBW 256 GB: 586 TBW 512 GB: 1,142 TBW *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Non-operating 1 2017 Apacer Technology Inc.