RoHS Compliant Serial ATA Flash Drive SM210-300 Product Specifications (Toshiba 15nm) March 30, 2017 Version 1.4 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Serial ATA Flash Drive APMxxxGMFXX-XXTM1XX Features: Compliance with SATA Revision 3.1 Temperature Range SATA 6.0 Gbps interface Operating: Backward compatible with SATA 1.5 and Standard: 0C to 70C 3.0 Gbps interfaces Extended: -40C to 85C ATA-8 command set Storage: -40C to 100C Capacity Supply Voltage 8, 16, 32, 64, 128, 256, 512 GB 3.3 V 5% Performance* Power Consumption* Burst read/write: 600 MB/sec Active mode: 825 mA Sustained read: up to 505 MB/sec Idle mode: 95 mA Sustained write: up to 360 MB/sec Form Factor Random read 4K: up to 83,000 IOPS JEDEC MO-300 Random write 4K: up to 79,000 IOPS Shock & Vibration** Flash Management Shock: 1,500 G Built-in hardware ECC Vibration: 15 G Global Wear Leveling Flash bad-block management DRAM Cache for Enhanced Random Flash Translation Layer: Page Mapping Performance S.M.A.R.T. SATA Power Management Modes Power Failure Management ATA Secure Erase Device Sleep Mode TRIM Write Protect Switch (optional) NAND Flash Type: MLC Thermal Sensor MTBF: >1,000,000 hours Standard temperature: Optional Extended temperature: Default Endurance (in Terabytes Written: TBW) 8 GB: 14 TBW LED Indicators for Drive Behavior 16 GB: 27 TBW RoHS Compliant 32 GB: 61 TBW 64 GB: 129 TBW 128 GB: 277 TBW 256 GB: 587 TBW 512 GB: 1,035 TBW *Varies from capacities. The values addressed here are typical and may vary depending on settings and platforms. **Non-operating 1 2017 Apacer Technology Inc. Rev. 1.4