05-Serie 25000N-A 05-Serie 25000N-A 06/11/14 13:55 Page14 25000N series Professional slide switches Distinctive features and specifications UG1410A Professional grade slide switches for PC boards Approved according to UL 1054 Wave solderable Not washable in aqueous process Available with flush, high and side actuator Various actuator lengths ELECTRICAL SPECIFICATIONS MATERIALS Max. current/voltage rating with resistive load : Case : PBT - silver contacts (A) : 1A 30VDC Actuator : polyamide, glass - gold plated brass contacts (LD) : 100mA 30VDC filled Minimum load : Cover : polyamide, glass filled - silver contacts (A) : 100mA 10V Contacts - gold plated brass contacts (LD) : 10A 5VDC - 10mA 50mV A : silver Initial contact resistance : LD : brass, gold plated - silver contacts (A) : 10m max. Terminal seal : epoxy - gold plated brass contacts (LD) : 50m max. Insulation resistance : 1.000 M min. at 500VDC Dielectric strength : 1.000 Vrms 50 Hz min. between terminals 2.000 Vrms 50 Hz min. between poles 2.000 Vrms 50 Hz min. between terminals and frame E Electrical life : 10.000 cycles at full load Low level or mechanical life : 20.000 cycles APPROVALS GENERAL SPECIFICATIONS Operating temperature : -40C to +85C 2A 250VAC Overall length : 14 mm (.551) 4A 125VAC Actuator height (outside case) : - high : 2,80 mm (.110) Availability : consult factory for details of approved models. - extra high : 6 mm (.236) Marking : To order switches marked UL, complete the Options and - side : 2,3 mm (.090) Approvals box of ordering format. - long side : 6 mm (.236) Travel : 4 mm (.157) The company reserves the right to change specifications without notice. E-14 www.apem.com APEM05-Serie 25000N-A 05-Serie 25000N-A 06/11/14 13:55 Page15 25000N series Professional slide switches Overview N 25 SERIES Actuator and terminals Number of poles Electrical functions Version 1 Flush or high actuator, 3 Single pole 6 ON - ON N For all models terminal spacing 4 Double pole 9 ON OFF ON 2,54 (.100) 4 Flush or high actuator, terminal spacing 5,08 (.200) 3 Side actuator, terminal spacing 2,54 (.100) 5 Side actuator, terminal spacing 5,08 (.200) Contact materials Actuator Options and approvals E A Silver B Flush X601 Special contact : LD Gold plated brass H High lower rating H6 Extra high Other : see following pages. Blank Side -6 Long side ABOUT THIS SERIES On the following pages, you will find successively : - model structure of switches (including actuator options) - contact options Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Packaging unit : single pole : 100 pieces - double pole : 50 pieces APEM www.apem.com E-15