3500 series High performance toggle switches environmentally sealed DISTINCTIVE FEATURES Completely sealed switches withstanding 0.1 bar pressure Approved to European standards CECC 96000 Three types of terminals Many lever styles available ENVIRONMENTAL SPECIFICATIONS Front sealing to IP67 or IP69K by a silicone membrane (for sealed panel mounting, add washer U60). Rear sealing to IP64 provided by moulded-in terminal inserts Operating temperature : -40 C to + 85C (-40 F to +185 F) Moisture resistance : 56 days ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load and electrical life at full load: see table below Initial contact resistance : 10 m max. at 1 A 2 VDC Insulation resistance : 1,000 M Dielectric strength : 2,500 Vrms 50 Hz min. between terminals 3,000 Vrms 50 Hz min. between terminals and frame FUNCTIONS GENERAL PERFORMANCES 10,000 cycles, T20 C ON-OFF 15 A 28 VDC resistive and 15 A 28 VDC inductive ON-ON 5 A 28 VDC lamp 10,000 cycles, T20 C 15 A 28 VDC resistive ON OFF ON 15 A 28 VDC inductive 5 A 28 VDC lamp 10,000 cycles, T20 C OTHER 15 A 28 VDC resistive FUNCTIONS 10 A 28 VDC inductive 3 A 28 VDC lamp The company reserves the right to change specifications without notice. 1 SW-3500-1711 PANEL SWITCHES3500 series High performance toggle switches environmentally sealed TERMINALS GENERAL SPECIFICATIONS Mechanical life : 40,000 cycles Torque : 2 Nm (1.47 Ft.lb) max. applied to nut Panel thickness : For NON-SEALED mounting (panel cut-out fig. 1, 2 or 3) : 5 mm (.196) max. For SEALED mounting (panel cut-out fig. 2) : 4 mm (.157) max. ELECTRICAL FUNCTIONS KEYWAY MATERIALS Case : mineral filled polyester UL94-V0 Bushing and cover : zamac Actuator : brass, nickel or chrome plated, or anodized aluminum Contacts : silver alloy PANEL CUT-OUT AGENCY APPROVAL CECC 96201-004 Availability : consult factory for details of approved models. Marking : to order switches marked CECC, complete appropriate box of ordering format. Figure 1 Figure 2 Figure 3 2 PANEL SWITCHES