5000 series Miniature toggle switches threaded bushing 6.35 mm or plain bushing DISTINCTIVE FEATURES 17 actuators including toggles, paddle levers and locking levers in different lengths. Various contact materials for low and high currents. 8 functions including maintained and momentary versions. 1 to 4 pole configurations. 12 terminal types including 9 for PC board mounting. Other types include quick-connect and wire-wrap. Several bushing styles. 3 types of finish including military black. 3 approvals (UL - CSA - CECC). 4 types of sealing for terminal or front panel requirements. Numerous accessories available. The company reserves the right to change specifications without notice. 1 SW-5000-1805 PANEL SWITCHES5000 series Miniature toggle switches threaded bushing 6.35 mm or plain bushing ELECTRICAL SPECIFICATIONS MATERIALS Case : diallylphthalate (DAP) or high Current/voltage rating with resistive load : temperature plastic material Contact Maximum Minimum Level* (UL94-V0) Silver (A) 4 A 30 VDC 50 mA 10 VDC III and IV Actuator : brass, nickel plated Silver, gold 4 A 30 VDC 10 mA 50 mV I to IV plated (AD) Gold plating withstands up to 100 mA 30 VDC 10 A 5 V Paddles : UL94HB polyamide Brass, gold 10 mA 50 mV 0.4 VA at 20 VAC or DC I and II plated (CD) 10 A 5 V Lever caps : vinyl *For details, see Technical Information on website. Bushing : brass, nickel plated Housing : stainless steel or steel tin For inductive, lamp or capacitive load, consult factory. plated Initial contact resistance : 10 m max. Contacts Insulation resistance : 1,000 M min. at 500 VDC A : silver Dielectric strength : AD : silver, gold plated 1,000 Vrms 50 Hz min. between terminals CD : brass, gold plated 1,500 Vrms 50 Hz min. between poles X814 : for peak currrents, 1,500 Vrms 50 Hz min. between terminals and frame seeSpecial option. Contact bounce : 2 ms max. Terminal seal : epoxy Electrical life at full load : APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. 50,000 cycles for single and double pole 40,000 cycles for 3 pole 30,000 cycles for 4 pole Low level or mechanical life : 100,000 cycles GENERAL SPECIFICATIONS Torque : 1.25 Nm (.922 Ft.lb) max. applied to nut Panel thickness : 2.5 mm (.098) with 2 nuts - 4 mm (.157) with 1 nut Operating temperature : -40 C to +85 C (-40 F to +185 F) AGENCY APPROVALS CECC 96201-007 3 A 250 VAC, 6 A 125 VAC For VDE, refer to 55000 series. NATO Availability : consult factory for details of approved models. Marking : to order switches marked UL, CSA or CECC, complete appropriate box of ordering format. The preferential list does not appear on the switches. 2 PANEL SWITCHES