A02ES-I series Emergency stop switches panel cut-out 22 mm DISTINCTIVE FEATURES Approved to EN 60947-5-5, UL 508 and CSA C22.2 No 14-10 Pull or twist to release AC-12, 6 A 240 VAC / DC-12, 8 A 24 VDC Panel sealed to IP65 Illuminated model available ELECTRICAL SPECIFICATIONS Electrical function : push to shut off, pull or twist to release Current/voltage rating : AC-12, 10 A 24 VAC / 6 A 240 VAC DC-12, 8 A 24 VDC AC-15, 10 A 24 VAC / 3 A 240 VAC DC-13, 4 A 24 VDC Electrical life : 100,000 cycles with one contact block Insulation resistance : 100 M min. Dielectric stength : contact block 2,500 Vrms Contacts : silver GENERAL SPECIFICATIONS Front panel sealing : IP65 Terminal IP20 (fingersafe) Panel thickness : 6 mm (.236) max. Low level or mechanical life : 250,000 cycles w. one contact block Operating temperature : -20 C to +55 C (-4 F to +131 F) Switch terminals : M3.5 screws MOUNTING LOCKING SYSTEM The company reserves the right to change specifications without notice. Not for sale in Japan. 1 fichier CA02ES-MLS echelle : 0.3 SW-A02ES-I-1803 PANEL SWITCHESPANEL SWITCHESA02ES-I series Emergency stop switches panel cut-out 22 mm PANEL CUT-OUT AGENCY APPROVALS 3.2-3.4 (.125-133) UL 508 EN 60947-5-5 CSA C22.2 No 14-10 ABOUT THIS SERIES Mounting accessories : standard hardware supplied : 1 nut and 1 flat panel seal ELECTRICAL FUNCTIONS Fichier: CA02ESIPE ECHELLE: 0.5 le 03/11/2015 Single pole Double pole Three pole Normally closed Normally closed Normally closed Fichier: CA02ESSH Fichier: CA02ESSH revision 3 revision 3 ECHELLE: 1 ECHELLE: 1 le 28/09/2016 le 28/09/2016 2 R0.80 (.031RAD) 22.30-22.70 (.877DIA-.893DIA) PANEL SWITCHES 24.10-24.5 (.948-.964)