FP series Fully illuminated pushbutton switches bushing 24 mm momentary or latching DISTINCTIVE FEATURES Threaded bushing Full actuator or symbol illumination Large but lightweight Sealed to IP69K Pad printed or laser etched symbols ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP69K according to DIN 40050-9 Optional back panel sealing : IP67 Operating temperature : -40 C to +75 C (-40 F to +167F) ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts (code 2) : 4 A 12 VDC - gold plated contacts (code 4) : 200 mA 12 VDC Initial contact resistance : 50 m max. Insulation resistance : 1 G min. at 500 VDC Dielectric strength : 1,000 Vrms 50 Hz min. Electrical life at full load : - Momentary models : 1 million cycles (gold plated contacts) 400,000 cycles (silver contacts) - Latching models : 200,000 cycles LED COMPONENT SPECIFICATIONS LED color Forward current Typ. forward voltage Max. forward voltage Blue (A) 20 mA 3.3 V 4 V Green (B) 20 mA 2.1 V 2.5 V Red (C) 20 mA 1.9 V 2.5 V Yellow (D) 20 mA 2 V 2.5 V White (E) 20 mA 3.3 V 4 V Red/green (F) 20 mA 1.9 V / 2.1 V 2.5 V / 2.5 V Red/blue (G) 20 mA 1.9 V / 3.3 V 2.5 V / 4 V White/blue (L) 20 mA 3.3 V / 3.3 V 4 V / 4 V A resistor must be series-connected by the user Resistor value = supply voltage - LED forward voltage LED forward current The company reserves the right to change specifications without notice. 1 SW-FP24-1909 PANEL SWITCHESPANEL SWITCHES24.20 (.953DIA) FP series Fully illuminated pushbutton switches bushing 24 mm momentary or latching PANEL CUT-OUT GENERAL SPECIFICATIONS Panel thickness : 1(.039) to 18 mm (.708) max. Total travel : 2.5 mm 0.5 mm Typical operating force : 8 N 2 N Low level or mechanical life : - Momentary models : 1 million cycles - Latching models : 200,000 cycles 11.30 (.445) Torque : 3 Nm max. applied to nut CFPDEC1-A MATERIALS WIRING DIAGRAM FICHIER: CFPDEC-P4 ECHELLE: 0.625 indice A Case : PA46 le 19/01/11 FLAT Actuator : PA12 + POLE 2 LED Bushing/ bezel : PA66 Contacts : silver (code 2) or silver, gold plated (code 4) Cable : length 300 mm, section depending on switch model Terminal seal : epoxy or overmolding APEM products may be recycled at end-of-life for the re-claiming of valuable metal components - LED POLE 1 CFP24W-A FICHIER: CFP24W ECHELLE: 0.625 indice A le 25/09/14 2 PANEL SWITCHES