IP series Pushbutton switches for harsh environments bushing 12 mm momentary DISTINCTIVE FEATURES Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 and IP69K ENVIRONMENTAL SPECIFICATIONS Front panel sealing: IP67 according to IEC 60529 IP69K according to DIN 40050-9 (non-illuminated) with cap U5125 Shock resistance: 100 g according to IEC 512-4, test 6c Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d Salt spray: IEC 512-6, test 11f Robustness (non-illuminated): IK06 according to EN 62262 (1 joule) Operating temperature: -40 C to +85 C (-40 F to +185 F) ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load (gold plated silver contacts): 5 A 28 VDC, 70,000 cycles (only function 3) For W terminals, current has 0.2 A 48 VDC, 500,000 cycles to be limited to 400 mA. 0.5 A 48 VAC, 500,000 cycles Initial contact resistance: 100 m max. Insulation resistance: 1 G min. at 500 VDC Dielectric strength: 1,500 Vrms Contact bounce: 10 ms LED COMPONENT SPECIFICATIONS LED color Forward current Typ. forward voltage Max. forward voltage Super red (L0S) 20 mA 2.1 V 2.3 V Yellow (L0Y) 20 mA 2.1 V 2.3 V A resistor must be series-connected by the user. Green (L0G) 20 mA 2.1 V 2.3 V Resistor value = supply voltage - LED forward voltage Blue (L0B) 20 mA 3.2 V 3.8 V LED forward current White (L0W) 20 mA 3.35 V 4.25 V Red/green (LSG) 20 mA Red: 1.95 V / green: 2.1 V 2.5 V Yellow/green (LYG) 20 mA Yellow: 2 V / green: 2.1 V 2.5 V The company reserves the right to change specifications without notice. 1 SW-IPMOM-1911 PANEL SWITCHESIP series Pushbutton switches for harsh environments bushing 12 mm momentary GENERAL SPECIFICATIONS TERMINALS Panel thickness: 1.5 mm (.059) min. ILLUMINATED MODELS 4 mm (.157 max.) Total travel: LED Cathode LED Function 3: 1.7 mm (.067) 0.3 mm (0.012) (-) Cathode (-) Function 5: 1.3 mm (.051) 0.3 mm (0.012) Solder lug S Straight P Typical operating force: 4 N 2 N Low level/mech. life: 1,000,000 cycles Torque: 1.5 Nm max. applied to nut NON-ILLUMINATED MODELS Soldering: 320 C (608 F) max. for 3 sec. 1.00 1.00 1.20 1.20 (.039) (.039) (.047) (.047) 2.80 2.80 (.110) (.110) MATERIALS Quick-connect Z1 Straight P Case: thermoplastic UL94-V0 CIPCOSPCIPCOSP CIPCOSZ1CIPCOSZ1 Actuator: polyamide 6/6 ELECTRICAL FUNCTIONS Bushing/bezel: zinc die-cast (zamak), black painted Contacts: - silver, gold plated (std) ILLUMINATED MODELS NON-ILLUMINATED MODELS - brass, gold plated (for option 104) Output wires (flying lead terminals): 2 F version: AWG20, section 0.6 mm 2 W version: AWG24, section 0.23 mm LED wires: 2 F version: AWG26, section 0.12 mm 2 Function 3 (NO) Function 3 (NO) Function 5 (NC/NO) W version: AWG24, section 0.23 mm Lens: polycarbonate Terminal seal: epoxy MOUNTING PANEL CUT-OUT 12.90 (.507) 1 AGENCY APPROVAL 2 A 125 VAC/250 VAC 13.60 File E83438 (.535DIA) 13.50 See following pages. (.531DIA) MATRIX MOUNTING - BACK OF PANEL SPACE REQUIREMENT 20.00 20.00 (.787) (.787) CIPCE1 2 PANEL SWITCHES 20.00 (.787) 5.20 (.204) 5.20 (.204) 4.55 (.179) 4.55 (.179) 8.70 (.342) 8.70 17.50 (.342) (.688) 2.40 (.094) 2.40 1.50min-4Max (.094) (.059 min-.157max)