MHU36

FEATURES Double pole - double throw and MHPS SERIES KEY SWITCHES 4 pole - double throw configurations. Momentary (non-locking) and maintained action (locking) models. Shorting and non-shorting contacts. Audible ( click ) and non-audible action models. GENERAL SPECIFICATIONS Contact rating: 100 mA 30 VDC Insulation resistance: 100 megohms minimum at 500 VDC Dielectric withstanding voltage: 500 VAC for 1 minute Contact resistance: 100 milliohms maximum Life: 10,000 cycles minimum Operating temperature range: -20C to +65C SOLDERING Wave soldering: 260C max. for 5 seconds maximum Manual soldering: 350C 10C for 3 seconds maximum Solvent washing: Non-washable. MATERIALS Case: PBT (model MHPS2266 only - Type 6/6 nylon) Cover: Acetal (model MHPS2266 only - Type 6/6 nylon) Actuator: Acetal Terminals: Silver plated brass Shorting Contact: Silver plated phosphor bronze M US Model No. Action Contacts Audible US MHPS2266 MHPS2266 maint d. non-sht g. no Travel: full- .075 (1.9mm) MHPS2266N mom. non-sht g. no to lock- .039 (1mm) Operating force: 14050g P.C. board layout DOUBLE POLE US MHPS2273 US Model No. Action Contacts Audible EU Model No. EU PHAP4673 MHPS2273 maint d. non-sht g. no PHAP4673 Travel: full- .071 (1.8mm) MHPS2273N mom. non-sht g. no N/A to lock- .039 (1mm) Operating force: 200gf 50gf P.C. board DOUBLE POLE layout www.apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.US MHPS2283 US Model No. Action Contacts Audible EU Model No. EU PHAP4683W MHPS2283 maint d. non-sht g. yes PHAP4683W Travel: full- .098 (2.5mm) MHPS2283N mom. non-sht g. no N/A to lock- .059 (1.5mm) MHPS2283V mom. non-sht g. yes PHAP4383V Operating force: 18050g P.C. board DOUBLE POLE layout US MHPS2285 Model No. Action Contacts Audible Travel: full- .098 (2.5mm) MHPS2285 maint d. non-sht g. yes to lock- .059 (1.5mm) MHPS2285N mom. non-sht g. no Operating force: 18050g MHPS2285V mom. non-sht g. yes M P.C. board layout DOUBLE POLE US MHPS4284 Model No. Action Contacts Audible Travel: full- .098 (2.5mm) MHPS4284 maint d. non-sht g. no to lock- .059 (1.5mm) MHPS4284N mom. non-sht g. no Operating force: 180g MHPS4284V mom. non-sht g. yes +100g, -50g P.C. board layout FOUR POLE CAPS (fit MHPS2273, MHPS2283 and MHPS2285 models only) No. Color Note - add digit from 1 blue table to cap part number 2 black for color. 3 green Example - MH12 indicates 5 yellow black cap. 6 red 7 ivory MH1 Square cap U4530 Round cap U4520 Square cap www.apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.